Panasonic VL-SWD272 Quick Start Manual page 2

Model Composition
VL-SWD272
Specifications
VL-MWD272
Model number and name
Main Monitor Station (Main monitor)
Extension Monitor
*1
Up to 3
(not including the main monitor)
Dimensions
(mm)
Power source 220-240 V AC, 50/60 Hz
Standby: Approx. 2.5 W
Power consumption
During operation: Approx. 10 W
Dimensions (H x W x D)
158 x 243 x 29.5 mm
(Excluding protruding sections)
Weight
Ambient temperature: Approx. 0 °C to +40 °C
Operating environment
Relative humidity (non-condensing): up to 90 %
Display 7-inch wide colour / WVGA (800x480 pixels)
Display language English, Arabic
Talking method
Frequency range 1.88 GHz to 1.90 GHz
Viewing angle
Installation method
(mounting bracket supplied)
Minimum illuminance required
Lighting method
Transmitting range
IP rating / IK rating
Flame retardant PC+ABS resin,
External material
Flame retardant ABS resin
*1 When sub monitors and extension monitors are used together, a total of up to 6 sub monitors and extension monitors can be registered.
*2 Including AC cord. The weight of the AC cord differs depending on the region.
*3 Water resistance is only assured if the doorphone is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken.
Installing the Doorphone
Mounting base
Wood screws
Screwdriver
Installing the Main Monitor/Extension Monitor
Mounting bracket
Vertical, flat wall
Screws
50 mm
Important
– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
DISTRIBUTED BY :
VL-V522L
Door Station (Doorphone)
Up to 2
99
243
29.5
158
Power supplied by the main monitor
-
131 x 99 x 36.5 mm
825 g *2 200 g
Ambient temperature: Approx. -15 °C to +55 °C
Relative humidity (non-condensing): up to 90 %
(tested up to -20 °C)
-
-
Hands-free -
-
Horizontally: Approx. 87˚
-
Vertically: Approx. 66˚
Wall mount
Surface mount (mounting base supplied)
1 lx
-
(within approx. 50 cm from the camera lens)
Warm white coloured LED lights,
-
Infrared LEDs
- -
*3
IPX3
-
Flame retardant ABS resin
83.5 mm
Wall
Wire
(User supplied)
Mounting
base
Hole in wall
60 mm
83.5 mm
7 mm
VL-MWD272 x 1, VL-WD613 x 1, VL-V552L x 1
VL-WD613
Wireless Monitor Station (Sub monitor)
Main body
*1
Up to 6
52
30
36.5
173
131
Rechargeable Ni-MH (AAA x 2)
-
173 x 52 x 30 mm
160 g (including the batteries)
Ambient temperature: Approx. 0 °C to +40 °C
Relative humidity (non-condensing): up to 90 %
2.2-inch colour / QVGA (320x240 pixels)
English, Arabic
Hands-free
1.88 GHz to 1.90 GHz
-
-
-
-
Approx. 100 m (line-of-sight distance
from the main monitor)
-
ABS resin
• Installation Position
99 mm
Side View
24 mm
Centre of
doorphone
131 mm
83.5 mm
1450 mm
Mounting bracket
Main Monitor
Charger
Up to 2
81
76
43
AC adaptor (PNLV226) AC adaptor (PQLV219)
Input: 220-240 V AC, 0.1 A, 50/60 Hz Input: 220-240 V AC, 0.1 A, 50/60 Hz
Output: 5.5 V DC, 0.5 A Output: 6.5 V DC, 0.5 A
Standby: Approx. 0.4 W (when the sub Standby: Approx. 1.5 W
monitor is not placed in the charger) During operation: Approx. 2.3 W
During charging: Approx. 1.4 W
43 x 81 x 76 mm
70 g (excluding the AC adaptor) 88 g (excluding the AC adaptor)
Ambient temperature: Approx. 0 °C to +40 °C Ambient temperature: Approx. 0 °C to +40 °C
Relative humidity (non-condensing): up to 90 % Relative humidity (non-condensing): up to 90 %
-
-
-
- 1.88 GHz to 1.90 GHz
-
-
-
-
Approx. 100 m (line-of-sight distance
-
from the main monitor)
-
ABS resin
66° Top View
Image range
960 mm
650 mm
500 mm
1160 mm
1810 mm
500 mm
243 mm
• The actual product may vary slightly from photograph.
• Weights and dimensions are approximate.
• Design and Specifications are subject to change without notice.
• These products may be subject to export control regulations.
MG-DHPL020EN 1608ITP/ZZZ-1
VL-FKD2
DECT Repeater
111
82
39
(when transmitting)
82 x 111 x 39 mm
-
-
-
-
-
-
-
-
PS resin
87°
58 mm
158 mm
83.5 mm