Samsung SPH-A700 Manual page 46

PCS Phone to receive a (mobile-terminated) data or fax
call:
1. Select the menu option to enable incoming data/fax calls.
Note that incoming voice calls are not possible when your
PCS Phone is set to receive data/fax calls.
2. Once you've received the incoming data/fax call, you may
want to return the phone to its normal state by disabling
incoming data/fax calls.
Using Special Features During a PCS Wireless Web Call
Your phone gives you the ability to use special features while
you're on a PCS Wireless Web call. They are outlined
below:
.
Caller ID: Just like your phone stores regular Caller ID
numbers, it also stores the numbers of incoming PCS
Wireless Web Connection calls. To distinguish between the
two types of calls, "Data" or "Fax" displays along with the
number of the caller when you view your Caller ID records.
Note:
Caller ID is not available on PCS Wireless Web Browser calls.
.
Call Waiting: If someone tries to reach you while you're
connected to the PCS Wireless Web, your phone
behaves like it is turned OFF. Depending on your service,
callers may get your voicemail. Call Waiting is automatically
deactivated whenever you place or receive a PCS
Wireless Web Connection call.
.
Accessing features: You can still access most of your phone's
features while you're connected on a PCS Wireless
Web Connection Call. You can navigate the phone's menu
system to change or view your phone's features or phone
book entries. You can also read messages or view the Caller
ID records that you received before placing the call.
Ending a PCS Wireless Web Call
It's important to note that some of the normal ways to end a call
won't work with the PCS Wireless Web Connection calls.
You should always close the connection through the application
on your computer. Your phone will then return to Standby
mode.