Advertisement
Quick Links
Advertisement
Summary of Contents for UniStrong UT30
- Page 1 UT30 Quickstart guide...
- Page 2 2.Battery Charging • Charge with travel charger Insert the small plug end of the USB data cable into the TYPE-C port of the device, insert the large plug end of the USB data cable into the travel charger plug, and then insert the travel charger plug into a power outlet to charge.
- Page 3 the charging icon when screen is on. When the charging is completed, the home screen status bar will display the full battery icon when screen is on. 3. Insert SIM card, memory card and battery Power off the device before installing or removing the SIM card, MicroSD card or battery.
- Page 4 Picture 1 Picture 2 Face the SIM card metal contacts downwards and push into the slot. Take note on the direction of the notched corner. Face the MicroSD card metal contacts downwards and push into the slot. Take note on the direction of the notched corner. Align the contacts of the battery with the terminals of the battery...
- Page 5 compartment and put in the battery gently. After the battery is installed, replace the battery compartment cover and push the back cover lock to locked position to secure the battery compartment cover. 4. Turning the device on and off To turn on the device, firmly press and hold the bottom right【Power Button】until the boot screen appears.
- Page 6 At the top of the home screen is the status bar, which contains the notification area, the status area and the display area; the shortcut panel is at the bottom. Using the notification panel When new notification icons appear in the notification area of the status bar, hold the status bar and drag down to open the notification panel;...
- Page 7 adding or removing “Shortcut Icons”. To remove the “Shortcut icon”, press and hold the “Shortcut icon” and drag it to the “Delete icon”. To add a “Shortcut icon”, press and hold the icon on the home screen and drag it to the Shortcut panel. Using applications Slide the screen left and right to see all the included applications.
- Page 8 Removing icons on the home screen Press and hold the home screen icon and drag the icon to the "Delete" icon until the icon turns red. Create folder On the home screen, folders are automatically formed when you drag an icon onto another icon.
- Page 9 transfer files between the device and the computer. If you need to remove the MicroSD card when the device is turned on, slide the screen to the left or right "→ Settings, or touch the [Menu button] → "System Settings", go into the Settings panel, scroll down the screen, and then select "Save"→"Uninstall SD Card".
- Page 10 The user can view the status of the BeiDou Satellite, GPS satellites and GLONASS satellites at the current position through an application with the corresponding functions. The program can display real-time information such as the serial number, signal strength, position of the satellite, etc.
- Page 11 9. Mobile network connection (WLAN/Bluetooth) • WLAN connection Slide the screen left or right → "Settings" to go into the settings panel, go to the WLAN options and turn the "On" switch to activate WLAN. After WLAN is turned on, the WLAN icon will be displayed in the status bar.
-
Page 12: Product Safety Warnings
Network panel. Select "VPN" to make the relevant settings. Notice This device is restricted to indoor use where operated in the European Community using frequency in 5150MHz ~ 5250MHz to reduce the potential for interference. Restriction in BE, BG, CZ, DK, DE, EE, IE, ES, FR, HR, IT, CY,LV,LT,LU,HU,MT,NL,AT, PL, PT, RO, SI, SK, FI, SE, Do not change antenna types ,just only allowed to use Original configuration antenna (FPC) PRODUCT SAFETY WARNINGS... - Page 13 Notice 1. Some special places, such as airports, hospitals, gas stations and other places, do not allow the use of electronic equipment. Please comply with the rules and do not use this product in these places. 2. For your safety and the safety of others, please do not use this product while driving a vehicle.
- Page 14 NOTICE: The SAR limit of Europe is 2.0 W/kg. Device types UT30 has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use on the body is 0.977W/kg This device was tested for typical body - worn operations with the back of the handset kept 0 cm from the body.
- Page 15 NOTICE: Changes or modifications made to this equipment not expressly approved by Shenzhen UniStrong Science & Technology Co.,Ltd. may void the FCC authorization to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.