Advertisement
ELECTRIC FIREPLACE MANTEL
FIT UP TO 62" PLASMA/LCD TELEVISIONS
MAXIMUM LOAD 135 lb. (61.22 kg)
CAUTION: This unit is intended for use only with the products and maximum weights
indicated. Use with other products or products heavier than the maximum weights
indicated may result in instability causing possible injury.
Note: Flat Panel TVs with base support should be placed squarely in the center of the
stand with no overhang on any side.
Twin-Star International, Inc.
Delray Beach, FL 33445
Made in China
Printed in China
26MM9405
INSTRUCTION MANUAL
MAXIMUM LOAD 30 lb. (13.6kg)
For Customer Service:
www.twinstarhome.com
In English call: 866-661-1218
In French call: 866-374-9203
In Spanish call: 866-661-1218
1
Español p. 8
Français p. 15
A T T E N T I O N
Requires-Electric Fireplace
Requires-Electric Fireplace
Insert with Heater
Insert with Heater
Advertisement
Table of Contents
Related Manuals for Twin-Star International 26MM9405
Summary of Contents for Twin-Star International 26MM9405
- Page 1 Note: Flat Panel TVs with base support should be placed squarely in the center of the stand with no overhang on any side. A T T E N T I O N For Customer Service: www.twinstarhome.com Twin-Star International, Inc. Requires-Electric Fireplace Requires-Electric Fireplace In English call: 866-661-1218 Delray Beach, FL 33445...
- Page 2 PACKAGE CONTENTS Part Description Quantity Hearth/Base Center Left Side Panel Center Right Side Panel Center Front Panel Left Side Panel Right Side Panel Glass Top Glass Shelf Side Back Panel Insert Support Bar Mantel/Top Glass Door...
- Page 3 HARDWARE CONTENTS Picture (Shown to size) Description Quantity Part Bolt 20+1 extra Washer 20+1 extra 20+1 extra Wood Dowel Door Touch Clip Suction Cup Pivot Hinge Magnetic Spring Catch Shelf Pin Metal Support Post Screw Screw Tipping Restraint Hardware Touch-up Pen...
- Page 4 SAFETY INFORMATION WARNING • Before assembly, carefully use scissors or utility knife to cut and unwrap all parts. Make sure you do not discard the hardware. CAUTION • Use care in assembling your new fireplace. Take your time and use the hardware provided and a quality Phillips head screwdriver.
- Page 5 2. Locate Hearth/Base (A) and set out fi nished side up Fig. 2 on the fl oor. Insert one Wood Dowel (CC) into each of the pre-drilled holes. Attach the Completed assembly from step 1 to the Hearth/Base (A). Make sure that dowels are seated into the pre-drilled holes in the Hearth/Base.
- Page 6 5. Attach the Magnetic Spring Catch (GG) on the Fig. 5 bottom of Top Panel, tighten screws (KK) through holes to the block as shown in diagram. Place the Door Touch Clip (DD) to the glass door. Insert the Pivot Hinge (FF) into the plastic mat as shown in diagram.
- Page 7 8. PLEASE READ ALL “ELECTRIC FIREPLACE Fig. 8 INSERT” INSTRUCTIONS PRIOR TO INSTALLING ELECTRIC INSERT IN YOUR COMPLETED FIREPLACE MANTEL. INSTALL Install THE INSERT IN YOUR FIREPLACE CLOSE TO Insert ITS FINAL POSITION. From Lift insert carefully into the back of the unit and Back center in the insert opening.
Need help?
Do you have a question about the 26MM9405 and is the answer not in the manual?
Questions and answers