Table of Contents
Advertisement
Quick Links
Yangzhou Weibang Garden Machine Company Limited
Hanjiang Industrial Park, Yangzhou City, Jiangsu
Province 225127, P. R. China
WBSC409H
SOD CUTTER
Operator's manual
(Original instruction)
DO NOT operates this equipment until you have read and understood all enclosed Operator's
Manual.
READ ALL the sections in this manual PRIOR to attempting to service, maintain or operate this
equipment!
Copyright WEIBANG China
All Rights Reserved
GB
Advertisement
Table of Contents
Related Manuals for WEIBANG WBSC409H
Summary of Contents for WEIBANG WBSC409H
- Page 1 Yangzhou Weibang Garden Machine Company Limited Hanjiang Industrial Park, Yangzhou City, Jiangsu Province 225127, P. R. China WBSC409H SOD CUTTER Operator's manual (Original instruction) DO NOT operates this equipment until you have read and understood all enclosed Operator’s Manual. READ ALL the sections in this manual PRIOR to attempting to service, maintain or operate this...
- Page 2 Symbols Explanation of Warning Signs Read instruction manual Before any cleaning, maintenance, and repair work switch off the engine and pull spark plug connector. Keep hands and feet away. With engine running, keep at safety distance from all rotating or moving components. When working with the machine, wear individual protective ear plugs.
-
Page 3: Table Of Contents
Content 1 Pre-operation note------------------------------------------------------------------------1 2 Safety precautions------------------------------------------------------------------------2 3 Assembly-------------------------------------------------------------------------------------8 3.1 Unpacking instructions----------------------------------------------------------8 3.2 How to set up your sod cutter------------------------------------------------9 4 Features and controls ------------------------------------------------------------------9 5 Transporting the sod cutter----------------------------------------------------------11 6 Pre-operation procedures------------------------------------------------------------12 7 Operation procedures------------------------------------------------------------------13 7.1 Starting and stopping the engine------------------------------------------13 7.2 Operating the machine to cutting sod------------------------------------14 7.3 Notes during operation--------------------------------------------------------16 8 Service and adjustment---------------------------------------------------------------17... -
Page 4: Pre-Operation Note
Thank you for your purchase of the WEIBANG sod cutter. This sod cutter has been designed and manufactured to our highest quality demands for durability and performance. -
Page 5: Safety Precautions
Do not use the machine if it has been modified or improperly maintained. All jobsites are different. Please ensure that when using the WEIBANG sod cutter, all local bylaws and codes are followed. All operators and mechanics of this machine should be trained in general machine use and safety. - Page 6 c. Know and mark the location of any and all buried utility lines or sprinkler systems. If in doubt, always check with your local utilities provider for survey information and assistance. d. Check for ventilation in area. Do not operate the sod cutter or run the engine in unventilated areas.
- Page 7 ●Before attempting to clear any jams in the unit, inspecting or servicing any part of the machine, stop the engine and remove the sparkplug wire, and make sure that all moving parts have come to a complete stop. ●Never leave machine unattended. Shut off the engine whenever you leave the work area. ●This machine only used for cutting sod and should not be used for any other purpose.
- Page 8 This guide aims to serve as a representational guide to the WBSC409H. Any other uses or application beyond the scope of this document are strictly prohibited. While every attempt has been made to maintain its accuracy，WEIBANG reserves the right to update and modify the...
- Page 9 3. Machine Serial Number 4. Quantity Required of Each Part 5. Part Numbers 6. Part Descriptions. Contents List Prior to setting up the WBSC409H Professional sod cutter, check that the following items are enclosed: Item Quantity Check if enclosed WBSC409H...
-
Page 11: Assembly
• Remove all packing materials. ● The WBSC409H is a HEAVY machine. The net weight is 387 lbs/176kgs. DO NOT ATTEMPT TO MANUALLY LIFT ALONE! It is recommended extremely using a crane to lift the unit. If there is no crane for lifting, make sure that four people lifting the machine are capable of lifting at least 100 lbs/45.36kgs individually!! NEVER ATTEMPT... -
Page 12: How To Set Up Your Sod Cutter
II HOW TO SET UP YOUR SOD CUTTER CAUTION: Wear protective gloves during operation of setting up your sod cutter. Ｈａｎｄｌｅ ｂａｒ Ｔｅｎｐｏｒａｒｙ ｂｒａｃｋｅｔ Ｎｙｌｏｎ ｓｐａｃｅｒ Ｒｏｄ Ｇｅａｒ ｂｏｘ Ｐａｒｔｓ ｒｅｌａｔｉｏｎｓｈｉｐ Ａｓｓｅｍｂｌｅｄ 1) Remove the temporary bracket, and then install the components of handle-bar & rod, and then connect the screw end of clutch cable to the belt clutch handle according to installing drawing. - Page 13 Upper locking lever Blade controling handle OPC lever Gear selecting lever Blade engaging lever Bumper Starting knob Throttle controlling lever Handle bar Lower locking lever Driving wheel Blade Crank Oil gauge Bumper, Used for protecting the engine and the towing the machine. Blade-controlling handle，used for controlling cutting depth and blade angle.
-
Page 14: Transporting The Sod Cutter
Do not manually drive the machine until the gear is disengaged. Do not tow the machine for transportation. ● The WBSC409H is a HEAVY machine. The net weight is 387lbs/176kgs. It is recommended extremely using a crane to lift the unit. -
Page 15: Pre-Operation Procedures
Before using the WEIBANG WBSC409H Professional Sod cutter, please perform the following procedures for the personal and property safety of the operator and jobsite and for optimal performance. 1). Before operating the sod cutter ensure that it is structurally and mechanically safe by checking the following: a. -
Page 16: Operation Procedures
appropriate for the job and jobsite requirements WARNING: Before operating the machine, be sure to read all safety, controls and operating instructions in this Owner’s Manual and on decals located on machine. Server personal injury or property damage could result if this instruction is not followed. Before starting the machine Read and understood all the sections in this manual Make sure the oil is the grade recommended by engine manufacturer. -
Page 17: Operating The Machine To Cutting Sod
See sod cutter instruction manual for starting, procedure and additional safety instructions before using the machine. 7.2 OPERATION THE MACHINE TO CUTTING SOD Start the engine when the gear box is in neutral. Turn the throttle lever to accelerate the engine till it runs smoothly (idle speed). - Page 18 9.1. Adjusting blade angle: Turn and release Adjust blade angle lower locking lever, and then turn blade controling lever to desired blade angle, then relock lower locking lever. Blade controling lever Lower locking lever Lossen 9.2. Tight Adjusting cutting depth: 1) For precise adjustment, set blade angle and keep the solt "A"...
-
Page 19: Notes During Operation
7.3 Notes during operation Start the machine when the gear shifting lever is set in neutral. To select gears successfully, slowly accelerate the throttle and meanwhile swing the selecting lever gently to engage gears completely. Set the gear selecting lever in neutral before stopping the machine. Soil conditions will influence cutting depth. -
Page 20: Service And Adjustment
●Do not operate the machine until read and understand all enclosed operator’s manual. CAUTION WEIBANG parts have been designed and manufactured to the highest quality demands for durability and performance of a commercial operation. Always use original spare parts with the logo "WEIBANG"... -
Page 21: Storage
Ensure that the area in which the machine will be stored is well-ventilated and free of any potential fire hazards such as open flames, gas appliances, furnaces, water heaters, and other appliances. Store unit in transport position (see “Transpor ting the WBSC409H” in “Operation Procedures” section) FUEL SYSTEM... -
Page 22: Maintenance Procedures
OTHER ● Do not store petrol from one season to another. ● Replace your petrol can if your can starts to rust. Rust and/or dirt in your petrol will cause problems. ● If possible, store your sod cutter indoors and cover it to give protection from dust and dirt. ●... -
Page 23: Preventative Maintenance Procedures
Regularly scheduled lubrication of the wheels, blade & rotor assembly, and linkage joints in the carriage is essential to smooth performance and extended equipment life. The following schedule is a recommended guide to lubricating your WBSC409H. The schedule should be adjusted for various environmental conditions and frequency of use. -
Page 24: General Service Procedures
Ensure that the technician has tied back or remove any loose hair, clothing and any other potential hazards and obstructions Disconnect spark plug. The following are general guidelines for servicing common wear components on the WBSC409H sod cutter. ALL MAINTENANCE AND SERVICE WORK MUST BE PERFORMED... -
Page 25: Pre-Maintenance
Also, make sure the engine has cooled down before you make any inspections, adjustments, etc. Use only original WEIBANG replacement parts. Parts from other manufacturers could be dangerous during operation even though they may appear to fit properly. - Page 26 LUBRICATION ●Assure a proper lubrication of your chipper/shredder (See "LUBRICATION CHART"). SOD CUTTER ●Always observe safety regulations when performing any maintenance or service works. TYRES ●Do not expose tires to petrol, oil, or insecticides or other chemicals, which can cause damage to rubber parts.
- Page 27 New belts have a break-in period and must be checked after 15 hours of use. We do not recommend adjusting or replacing the drive belt by customers. Please contact local Authorized Service Centre or WEIBANG’s exclusive national distributor to complete this work or for details.
- Page 28 3. Remove the drain plug on the bottom of the engine and drain oil into a suitable container. Grasp starter rope handle and pull slowly to rotate the crank shaft and remove any oil trapped inside of engine. 4. Reassemble and fasten the drain plug. Wipe off any spilled oil from the engine. 5.
-
Page 29: Troubleshooting
Troubleshooting Often, small problems can occur in daily operation of any machine. The following troubleshooting guide aims to address common issues and offer suggestions on how to correct such problems. Please review this guide before requesting service. Small problems can often be fixed simply by following these guidelines. - Page 30 Contact you local dealer and ask for excessively service. Adjust the shifting spring in gearbox, Shifting spring is damaged, replace it with new one from WEIBANG Can not shift the gear selecting lever The controlling structure of gear selecting lever is damaged, replace it with new one from WEIBANG fluently.
-
Page 31: Warranty
4. Engine Consult with engine manufacturer To make a warranty claim within this time period, please contact WEIBANG’S local dealer or WEIBANG’s exclusive national distributor, who will advise the validity and claim procedure. Once the claim has been accepted, if it is needed, the unit and/or parts should be shipped to the specified Authorized Service Centre at the customer’s expense. - Page 32 EC DECLARATION OF CONFORMITY Business name of the manufacturer: Yangzhou Weibang Garden Machine Company Limited full address of the manufacturer: Hanjiang Industrial Park, Yangzhou City, Jiangsu Province, 225127, P.R. China name and address of the person (established in the Community) compiled the technical file: Van Dyck Marcel Belgium, Provinciebaan 79, 2235 Houtvenne Belgium.
Need help?
Do you have a question about the WBSC409H and is the answer not in the manual?
Questions and answers