Table Of Contents 2 Installation - Home Decorators Collection HB7045A-292 Use And Care Manual

Installation
1
Mounting the hardware

Thread the fixture screws (FF) into the
provided holes of the mounting bracket
(GG).

Thread the hex nuts (BB) onto the fixture
screws (FF). Do not tighten the hex nuts
(BB) at this time.

Pull the supply wires out from the outlet
box and mount the mounting bracket (GG)
to the outlet box using the bracket
mounting screws (EE).

Place the fixture pan (A) over the outlet
box and onto the fixture screws (FF).

Adjust the fixture screws (FF) until it
protrude out from the fixture pan (A) 1/4 in.

Remove the fixture pan (A) and secure the
position of the fixture screws (FF) by
tightening the hex nut (BB) against the
mounting bracket (GG).
2
Connecting the wires
NOTE: If you have electrical questions consult
your local electrical code for approved
grounding methods.

Connect the black supply wire to the black
fixture wire using a wire nut (DD).

Connect the white supply wire to the white
fixture wire using a wire nut (DD).

Connect the fixture ground wire to the
supply ground wire using a wire nut (DD).

Wrap all wire connections with electrical
tape for a more secure connection.

Carefully tuck the wires and wire nuts (DD)
into the outlet box.
GG
EE
GG
FF
DD
5
Please contact 1-800-986-3460 for further assistance.
FF
BB
BB
www.homedepot.com/homedecorators
A