Table of Contents
Advertisement
6.
Insert the power cord into the monitor, then plug the monitor power cord and the computer
cord into grounded electrical outlets.
Note: A certified power supply cord has to be used with this equipment. The relevant
national installation and or equipment regulations shall be considered. A certified power
supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC
60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G 0.75mm2) shall be used.
Alternative a flexible cord be of synthetic rubber according to IEC 60245 (designation
H05RR-F 3G 0.75mm2 ) shall be used.
7. Power on the monitor and the computer.
8. When you install the monitor driver, download the driver that corresponds to your monitor
model from the Lenovo website: http://support.lenovo.com/docs/D22_20
Refer to the
""Manually installing the monitor driver"on page 3-5" section to install the
driver.
1-7
Chapter 1.
Advertisement
Table of Contents
