Advertisement

Quick Links

AK-EC-02 - user manual
Security
Mechanical
lock hole
strength

Short description of the product

The Akyga AK-EC-02 cable is used to charge electric vehicles at charging stations equipped with a Type
2 socket. The cable is compatible with all models of vehicles powered between 110-250 V / 16 A and
J1772 Type 1 plug. The maximum charging power of the vehicle is 3.8 kW.
The product is compatible with the applicable national and European requirements.
What is in the box?
- AK-EC-02 electric car cable
- Storage Bag

Symbols explanation:

There is a particular danger connected with service.
There is a risk of losing health or life (e.g. by electic shock).
Important tips and information.
The CE standard description on the product is the manufacturer's declaration that the marked
product meets the requirements of the directive so-called The "New Approach" of the European
Union (EU). For security and certification (CE) reasons, the device can not be rebuild or change
in any way. In the reason of using the cable for other purposes than those described, the product
may be demaged. The incorrect use may also cause hazard such as short-circuits, burns, electric
shocks, etc. Read the users manual carefully and keep it for later use. The product could be share
to third partie only with the user manual included.
Product accordance with the EU directive 2002/96/EC. The symbol of the crossed out basket
placed on the product means that the marked product can not be disposed of with other
household waste. After use, the product must be return to collection point for used electical and
electronic equipment or to the seller. Appropriate segregation of rubbish for subsequent
processing, recovery or descrution contributes to avoiding negative effects on the environment
and health, and also allows the recovery of raw materials from which the product is made.
The RoHS mark on the product is the manufacturer's declaration that the marked product meets
the requirements of the EU Restriction of Hazardous Substances (2002/95/EC) directive, which
aims to reduce the amount of hazardous substances penetrating into the environment from
electrical and electronic waste.
Strength
Fire Resistance
IP rating
GREEN
Ecological Solutions
www.akyga.com
p. 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AK-EC-02 and is the answer not in the manual?

Questions and answers

Summary of Contents for Akyga AK-EC-02

  • Page 1 Short description of the product The Akyga AK-EC-02 cable is used to charge electric vehicles at charging stations equipped with a Type 2 socket. The cable is compatible with all models of vehicles powered between 110-250 V / 16 A and J1772 Type 1 plug.
  • Page 2 AK-EC-02 - user manual The II protection class device. It provides protection against electric shock against direct and indirect contact, and thanks to the additional isolation it is not necessary to connect the device case with the protective earth conductor.
  • Page 3 AK-EC-02 - user manual Cleaning the EV cable Disconect the EV cable from the electrical socket and connected devices before cleaning. Use soft and antistatic cloth for cleaning the cable. ź Do not use abrasive or chemical cleaners. ź Removing the most common problems...
  • Page 4 AK-EC-02 - user manual Type 1 connector The Type 1 connector should be connected to vehicle charging socket. The plug is characterised by five sleeves and protective latch. Type 2 connector The Type 2 socket plug should be connected to a power source with a connector of the same type.
  • Page 5 AK-EC-02 - user manual Technical specfication Product code: AK-EC-02 Supply voltage: 110 - 250 V / 50/60 Hz Maximum amperage: 16 A Maximum power: 3.8 kW Temperature: -30 - 50 ºC Material: Isolation material: IP Rating: IP44 Flame resistance: UL94V-0...

Table of Contents