Removing/Assembling Doors And Drawers - LG LFXC22526D Owner's Manual

us_main.book.book Page 16 Thursday, February 4, 2021 8:47 AM
16 INSTALLATION
fasteners and tightening the set screws
with a 1/8 in. Allen wrench.
Removing/Assembling
Doors and Drawers
If the entrance door is too narrow for the
refrigerator to pass through, remove the
refrigerator doors and move the refrigerator
sideways through the doorway.
WARNING
• Use two or more people to remove and install
the refrigerator doors and freezer drawer.
• Disconnect the electrical supply to the
refrigerator before installing.
• Do not put hands, feet or other objects into the
air vents or bottom of the refrigerator.
• Be careful when handling the hinge and hinge
lever.
• Remove food and bins before detaching the
doors and drawer.
• Do not hold the handle when removing or
replacing the doors and drawer as the handle
may come off.
Tools Needed
3/32 in. Allen wrench
1/8 in. Allen wrench
1/4 in. Allen wrench
Removing the Left Refrigerator
Door
NOTE
• The number of wire harnesses may vary
depending on the model.
1
The water supply is connected to the upper
b
right part of the rear surface of the
refrigerator. Remove the clip in the joint area.
Hold the water supply connection and gently
push the collet
line as shown.
• Connections may vary by model.
† This feature is only available on some
models.
†
Type A
†
Type B
†
Type C
NOTE
• Disassembling/Assembling the Water Lines
Collet Tube
b c
2
Remove the screw
the top of the refrigerator. Lift the hook (not
visible), located at the bottom of the front side
of the cover
to detach the water supply
a
Insert line Clip
d e
from the hinge cover at
f
with a flat-head screwdriver.
g