LSDA EL740S User Manual
  1. Manuals
  2. Brands
  3. LSDA Manuals
  4. Locks
  5. EL740S
  6. User manual

LSDA EL740S User Manual

Electronic pushbutton locks
Hide thumbs
Table of Contents

Advertisement

Quick Links

Electronic Pushbutton Locks
USER S GUIDE
security
I MP O RT A N T S A F ET Y IN S TR UC TIO N
1. To prevent damage to the finish, DO NOT use any abrasives, sharp objects or harsh chemical
products containing alcohol, petroleum solvents, acids or acetone to clean this lockset.
！
2. To prevent damage to the sensitive electronic components, DO NOT allow any liquids to enter
lockset while installing or cleaning.
1. Do not attempt to disassemble any internal components of this lockset as this WILL void the
limited warranty.
2. Do not drop or hit /strike the lockset as excessive shock may result in permanent damage.
3. Do not use sharp objects to press key buttons.
CAUTION
4. It is Strongly recommended that you always create a written backup of the programming code
and individual user codes. Please use the last page of this booklet as your reference.
5. For your Security, please remember to change this lockset's factory default programming code to
a PERSONAL programming code prior to normal day to day use of this product.
6. It is STRONGLY recommended that you use only ALKALINE BATTERIES to operate this product.
'
technology
01A
EL740S
© 2017 IDN, Inc. All rights reserved.
0817

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EL740S and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for LSDA EL740S

Summary of Contents for LSDA EL740S

  • Page 1 Electronic Pushbutton Locks EL740S USER S GUIDE ’ security technology I MP O RT A N T S A F ET Y IN S TR UC TIO N 1. To prevent damage to the finish, DO NOT use any abrasives, sharp objects or harsh chemical products containing alcohol, petroleum solvents, acids or acetone to clean this lockset.

  • Page 2: Table Of Contents

    Electronic Pushbutton Locks EL740S I N S T R U C T I O N S IM P O R TA N TES D E SECUR I TE 1. N’utilisez pas de produits abrasifs ou de produits chimiques contenant de l'alcool, du benzene, de l'acide chlorhydrique ou de l'acide nitrique, et evitez d'utiliser des objets tranchants ou abrasifs ！...

  • Page 3: Main Operating Instructions

    Electronic Pushbutton Locks EL740S CONTENTS 11. HOW TO DISABLE ALL EXISTING USER CODES / PROXIMITY CARDS / REMOTE CONTROLS (VACATION MODE) 12. HOW TO DISABLE BUTTON SOUND (MUTE MODE) 13. HOW TO ENABLE AUTO-LOCK MODE 14. HOW TO SETUP AUTO-LOCK TIME DELAY 15.

  • Page 4: Programming Code And User Code

    Electronic Pushbutton Locks EL740S MAIN OPERATING INSTRUCTIONS Inductive Zone & RFID Card： Inductive Zone (only available for Proximity Card Electronic Deadbolt) 1. Inductive zone is around the keypad. 2. The proximity card we offer is the latest Radio Frequency Identification (RFID) technology, compatible with standard Mifare -13.56 MHz.

  • Page 5: Components

    Electronic Pushbutton Locks EL740S COMPONENTS COMPONENTS J. Decorative Cover A. Exterior Assembly K. Adjustable Latch B. Cable (Square or radius faceplate or drive-in) C. Tailpiece L. 6/8” (19mm) Wood Screw (4) D. Mounting Plate E. 1-1/4” (32mm) Screw (1) M. Strike Plate N.

  • Page 6: Installation Instructions

    Electronic Pushbutton Locks EL740S INSTALLATION INSTRUCTIONS Mark the Door with a Template Sheet (attached separately) Note: If the door is pre-drilled, please begin with page 13. a.Use TEMPLATE to mark centerline on door for for deadbolt about 3” to 6”...
  • Page 7 Electronic Pushbutton Locks EL740S INSTALLATION INSTRUCTIONS DRILL HOLES a.Drill a 2-1/8” ( 54 mm) or 1-1/2” ( 38 mm ) hole on the door face from both sides to avoid wood splitting. INSTALLATION INSTRUCTIONS DRILL HOLES b.Drill a 1”( 25 mm ) hole on the door edge for the latch.
  • Page 8 Electronic Pushbutton Locks EL740S INSTALLATION INSTRUCTIONS PREPARE DOOR JAMB AND INSTALL STRIKE PLATE Door jamb hole dimension Strike dimension Note: The dust box and reinforced strike plate are optional. It is recommended to install both of them for maximum security.
  • Page 9 Electronic Pushbutton Locks EL740S INSTALLATION INSTRUCTIONS DRIVE-IN COLLAR or FACEPLATE ADJUSTMENT In addition to 2-3/8”( 60 mm ) or 2-3/4”( 70 mm ) adjustable backset, you may change the faceplate to drive-in collar. (If your door is not a drive-in latch type, please skip this step.)
  • Page 10 Electronic Pushbutton Locks EL740S INSTALLATION INSTRUCTIONS Drill a 5/16”(ø8mm) hole on the door when the screw post is installed. Thread the tailpiece through the latch in horizontal position. Thread the cable through the hole and under the latch. INSTALLATION INSTRUCTIONS Slide cable through the notch of mounting plate.
  • Page 11 Electronic Pushbutton Locks EL740S INSTALLATION INSTRUCTIONS Make sure the mounting plate is parallel with the edge of the door. Fasten the mounting plate with 2-1/8” (54mm) screws*2 and 1-1/4” (32mm) screw*1. Note: Screw (E) is an optional screw. We recommend using screw (E) for the stability of the lockset.
  • Page 12 Electronic Pushbutton Locks EL740S INSTALLATION INSTRUCTIONS Cable Connector Connect the cable into the connector port firmly. port The metal connector side should face outside. Note: The red portion of the cable is aligned with the red portion of the connector port.
  • Page 13 Electronic Pushbutton Locks EL740S INSTALLATION INSTRUCTIONS Insert 5/16” (7.8mm) screws (H) and tighten them. Insert a 13/16” (20mm) screw (I) and tighten it. INSTALLATION INSTRUCTIONS AUTOMATIC - BOLT DIRECTION DETERMINATION Note: After installing the lock on the door, do the bolt direction determination first and then restore it to the factory setting.

  • Page 14: Setup Mode

    Electronic Pushbutton Locks EL740S INSTALLATION INSTRUCTIONS We recommend to re-install the decorative cover after completing setup mode in page 25 to page 42. If you want to remove the decorative cover, please hold the bottom of the decorative cover and pull it toward yourself.

  • Page 15: How To Add An User Code

    Electronic Pushbutton Locks EL740S SETUP MODE HOW TO ADD AN USER CODE Steps are as follows: 1. Press and hold [SET] button for over 2 seconds. The Red LED will light up and beep twice. You are now under setup mode.

  • Page 16: How To Add A Single-Use User Code/ Proximity Card/ Remote Control

    Electronic Pushbutton Locks EL740S SETUP MODE HOW TO ADD A SINGLE-USE USER CODE / PROXIMITY CARD / REMOTE CONTROL Steps are as follows: 1. Press and hold [SET] button for over 2 seconds. The Red LED will light up and beep twice.

  • Page 17: How To Delete An Individual Existing User Code

    Electronic Pushbutton Locks EL740S SETUP MODE HOW TO DELETE AN INDIVIDUAL EXISTING USER CODE Steps are as follows: 1. Press and hold [SET] button for over 2 seconds. The Red LED will light up and beep twice. You are now under setup mode.

  • Page 18: How To Delete An Individual Existing Remote Control

    Electronic Pushbutton Locks EL740S SETUP MODE HOW TO DELETE AN INDIVIDUAL EXISTING REMOTE CONTROL (only available for Remote Control Electronic Deadbolt) Steps are as follows: 1. Press and hold [SET] button for over 2 seconds. The Red LED will light up and beep twice. You are now under setup mode.

  • Page 19: How To Delete All Existing Proximity Cards/ Remote Controls At Once

    Electronic Pushbutton Locks EL740S SETUP MODE HOW TO DELETE ALL EXISTING PROXIMITY CARDS / REMOTE CONTROLS AT ONCE (only available for Proximity Card Electronic Deadbolt / Remote Control Electronic Deadbolt) Steps are as follows: 1. Press and hold [SET] button for over 2 seconds.

  • Page 20: How To Disable Button Sound (Mute Mode)

    Electronic Pushbutton Locks EL740S SETUP MODE HOW TO DISABLE BUTTON SOUND (MUTE MODE) Steps are as follows: 1. Press and hold [SET] button for over 2 seconds. The Red LED will light up and beep twice. You are now under setup mode.

  • Page 21: How To Setup Auto-Lock Time Delay

    Electronic Pushbutton Locks EL740S SETUP MODE HOW TO SETUP AUTO-LOCK TIME DELAY Steps are as follows: 1. Press and hold [SET] button for over 2 seconds. The Red LED will light up and beep twice. You are now under setup mode.

  • Page 22: How To Restore Factory Setting

    Electronic Pushbutton Locks EL740S SETUP MODE HOW TO RESTORE FACTORY SETTING Steps are as follows: 1. Remove one battery from the battery pack. 2. Press and hold [SET] button and put the battery back. Keep holding [SET] button until a long beep and a short beep are heard.

  • Page 23: Operation Mode

    Electronic Pushbutton Locks EL740S OPERATION MODE HOW TO LOCK manually Keypad: Press button to lock the door. Remote control: Press lock button to lock the door as shown. (only available for Remote Control Electronic Deadbolt) HOW TO LOCK automatically 1. Auto-lock mode should be turned on and auto-lock time delay should be also set up.

  • Page 24: Safe Mode

    Electronic Pushbutton Locks EL740S OPERATION MODE SAFE MODE 1. The keypad will be automatically deactivated for 1 minute after 4 wrong attempts. 2. Wrong attempts will not be counted when you press button to clear previous incorrect codes before the red LED lights up.
  • Page 25 Electronic Pushbutton Locks EL740S TROUBLESHOOTING GUIDELINE QUESTIONS ANSWERS 1. Check to see if the batteries are well-installed. Keypad does not respond 2. Check to see if the Yellow LED light is flashing or not. It means at all. "low battery" if the light keeps flashing.
  • Page 26 Electronic Pushbutton Locks EL740S TROUBLESHOOTING GUIDELINE QUESTIONS ANSWERS Red LED light is still on after 1. Please make sure if [SET] button is jammed. setting is completed? 2. Please re-install the batteries. 1. Please make sure turn on auto-lock mode.

  • Page 27: Declarations And Safety Statements

    Electronic Pushbutton Locks EL740S DECLARATIONS AND SAFETY STATEMENTS Federal Communications Commission Statement This device complies with Part 15 of the FCC. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Table of Contents

Save PDF