Table of Contents
Advertisement
Operation Manual / TPL65-A32 / -A33 / -A36 + TPL69-A32 / -A33
2 Safety / 2.6 Safe operation and maintenance
© Copyright 2020 . All rights reserved.
Safety during disassembly, assembly, maintenance and
troubleshooting
Always perform the specified adjustments, servicing as well as in-
u
spection work and observe inspection intervals.
Inform operating personnel about all service and repair work before
u
beginning.
Before opening a cover or removing a protective device on a tur-
u
bocharger, the engine must be switched off and the turbocharger
must have come to a standstill.
Ensure that the supply of oil is interrupted, especially with an external
u
oil supply.
Put the engine into operation only after all parts have been refitted
u
properly.
CAUTION
Mechanical work on the turbocharger
Possible damage to or destruction of components on the turbocharger.
Perform only those tasks that are described in this manual.
u
Perform work only for which training has been carried out.
u
Safety when taking out of operation or preparing for mothballing
Secure the rotor so it cannot turn. The rotor can turn on its own from
u
the force of the stack draught.
Clean the turbocharger before mothballing it.
u
Observe the material safety data sheet for the cleaning and moth-
u
balling agents.
Wear personal protective equipment (PPE) according to the material
u
safety data sheet.
HZTL2498_EN
Rev.E
March 2020
Advertisement
Table of Contents
