Advertisement
Available languages
Available languages
Never leave the appliance unattended when it is plugged in. Always put
the appliance on a heat-resistant surface when it is heating up and
when it is hot.
For safety reasons, the straightener automatically switches off after
having been on for 1 hour.
3
Select a temperature setting that is suitable for your hair type.
-
Always select a low setting when you use the straightener for the first
time.
-
For coarse, curly or hard-to-straighten hair, select a medium to high
setting (170 and up).
-
For fine, medium-textured or softly waved hair, select a medium to
low setting (160 and below).
Note: Take extra care with pale, blonde, bleached or colour-treated hair, since
it is susceptible to damage at high temperatures.
4
Use the + and - buttons to set the appropriate temperature
setting. (Fig. 5)
The display shows the selected temperature setting.
,
When the appliance has heated up to the selected setting, the word
,
'READY' appears on the display.
The bars on the display show the remaining usage time of the
,
appliance. The total usage time is 60 minutes. Every ten minutes,
one of the six bars disappears. After 60 minutes, the appliance
switches off automatically.
5
Comb or brush your hair so that it is disentangled and
smooth. (Fig. 6)
6
Use a comb to divide the hair into sections. Do not put too much
hair in one section.
Note: It is better to section off the crown area and to straighten the hair
underneath first. Then straighten the top area.
7
Take a section that is not wider than 5cm. Place it between the
straightening plates and press the handles of the appliance firmly
together.
EnglisH
9
Advertisement
