Summary of Contents for SPARES ZONE UBTC30BVT
- Page 1 Ceramic Hob / Induction Hob Instruction Manual / Installation Manual MODEL: UBTC30BVT UBTCC60BVT UBTCC60BVPF.1 UBINDECO60PF...
-
Page 2: Installation
SAFETY WARNINGS PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING THE APPLIANCE. Installation Electrical Shock Hazard • Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance on it. • Connection to a good earth wiring system is essential and mandatory. - Page 3 • This appliance is to be properly installed and earthed only by a suitably qualified person. • This appliance should be connected to a circuit which incorporates an isolating switch providing full disconnection from the power supply. • WARNING: Use only hob guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable or hob guards incorporated in the appliance.
-
Page 4: Important Safety Instructions
• During use, accessible parts of this appliance will become hot enough to cause burns. • Do not let your body, clothing or any item other than suitable cookware contact the ceramic glass until the surface is cool. • Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. - Page 5 • Do not store items of interest to children in cabinets above the appliance. Children climbing on the cooktop could be seriously injured. • Do not leave children alone or unattended in the area where the appliance is in use. •...
- Page 6 • Care should be taken to avoid touching heating elements. • Children less than 8 years of age shall be kept away unless continuously supervised. • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the...
-
Page 7: Product Overview
Top View 1. max. 1200 / 1500 W zone 2. max. 1800 / 2100 W zone 3. Control panel UBTC30BVT 1. max. 1800 W zone 2. max. 1200 W zone 3. max. 1800 W zone 4. max. 1200 W zone 5. - Page 8 2. max. 1200 / 1500 W zone 3. max. 1800 / 2100W zone 4. max. 1200 / 1500 W zone 5. Control panel UBINDECO60PF The Control Panel UBTC30BVT UBTCC60BVT UBTCC60BVPF.1 UBINDECO60PF 1. ON/OFF switch 4. Child lock 2. Select power level 5.
-
Page 9: Product Information
Product Information The ceramic/induction hob can meet different kinds of cuisine demands because of resistance wire heating, micro-computerized control and multi-power selection, really the optimal choice for modern families. The hob centers on customers and adopts personalized design. The hob has safe and reliable performances, making your life comfortable and enabling to fully enjoy the pleasure from life. -
Page 10: Choosing The Right Cookware
Choosing the right Cookware Only use cookware with a base suitable for induction cooking. Look for the • induction symbol on the packaging or on the bottom of the pan. You can check whether your cookware is suitable by carrying out a magnet •... -
Page 11: Using Your Hob
Always lift pans off the ceramic hob – do not slide, or they may scratch the glass. Using your Hob To start cooking After power on, the buzzer beeps once, all the indicators light up for 1 second then • go out, indicating that the hob has entered the state of standby mode. - Page 12 Turn the cooking zone off by scrolling down to”0”. Make sure the display shows”0”. Turn the whole cooktop off by touching the ON/OFF control. Beware of hot surfaces “H” will show which means cooking zone is too hot to touch. It will disappear when the surface has cooled down to a safe temperature.
-
Page 13: Locking The Controls
Default working timer (hour) 15 min Auto Cut-Off Function (for UBTC30BVT / UBTCC60BVT only) UBTC30BVT / UBTCC60BVT preset 15min auto cut-off function. Once you have turned on the heating zone(s), the cut-off timer will be • activated automatically. The zone will automatically turn off after 15 minutes. -
Page 14: Using The Timer As A Minute Minder
You can use it as cut-off timer to turn one or more cooking zones off after time is * You can set the timer up to 99 minutes. * UBTC30BVT / UBTCC60BVT only has 15 min timer. Please refer the setting time instructions on page 17-18. - Page 15 5. Set the time by touching the “-“ or “+” control (e.g.9), now the timer you set is 95 minutes. 6. When the time is set, it will begin to count down immediately. The display will show the remaining time. 7.
- Page 16 5. set the time by touching the ”-“ or ”+” control (e.g.9), now the timer you set is 95 minutes. 6. When the time is set, it will begin to count down immediately. The display will show the remaining time. Note: There will be a red dot in the right bottom corner of power level indication which indicating that zone is selected.
- Page 17 Additional setting time illustrations ( for UBTC30BVT / UBTCC60BVT only) Using the Timer as a Minute Minder 1. Make sure the cooktop is turned on. And zone selection key is not activated (zone indication ‘-‘ is not blinking). Note: you can set minute minder before or after cooking zone power setting finished.
- Page 18 and “1”, “0” will blink at the same time.. 3. Set the time between 0 and 15 min by continuously touching the”-“or”+” control (e.g. 5), now the time you set is 15 minutes, 4. When the time is set, it will begin to count down immediately. The display will show the remaining time.
-
Page 19: Cooking Guidelines
3. Touch the “-” control to set the timer to ”00”, the timer is cancelled. Note: For model UBTC30BVT/UBTCC60BVT, when you set timer for a single heating zone or several cooking zones, you can operate the timer between 1 and 15 minutes. - Page 20 Searing steak To cook juicy flavoursome steaks: 1. Stand the meat at room temperature for about 20 minutes before cooking. 2. Heat up a heavy-based frying pan. 3. Brush both sides of the steak with oil. Drizzle a small amount of oil into the hot pan and then lower the meat onto the hot pan.
-
Page 21: Heat Settings
Heat Settings Heat setting Suitability • delicate warming for small amounts of food 1 - 2 • melting chocolate, butter, and foods that burn quickly • gentle simmering • slow warming • reheating 3 - 4 • rapid simmering • cooking rice •... -
Page 22: Care And Cleaning
Care and Cleaning What? How? Important! Everyday soiling on glass 1. Switch the power to the cooktop off. • When the power to the cooktop is (fingerprints, marks, 2. Apply a cooktop cleaner while the switched off, there will be no ‘hot stains left by food or glass is still warm (but not hot!) surface’... -
Page 23: Hints And Tips
Hints and Tips Problem Possible causes What to do The cooktop cannot No power. Make sure the cooktop is connected to Be turned on. the power supply and that it is switched on. Check whether there is a power outage in your home or area. If you’ve checked everything and the problem persists, call a qualified technician. -
Page 24: Failure Display And Inspection
The above are the judgment and inspection of common failures. Please do not disassemble the unit by yourself to avoid any dangers and damages to the induction hob Technical Specification Ceramic Hob UBTC30BVT Cooking Zones 2 Zones Supply Voltage 220-240V~ 50/60Hz... -
Page 25: Selection Of Installation Equipment
Ceramic Hob UBTCC60BVPF.1 Cooking Zones 4 Zones Supply Voltage 220-240V~ 50/60Hz Installed Electric Power 6000W Product Size D× W× H(mm) 590× 520× 50 Building-in Dimensions A× B (mm) 560× 490 Induction Hob UBINDECO60PF Cooking Zones 4 Zones Supply Voltage 220-240V~ 50/60Hz Installed Electric Power 2800W Product Size D×... - Page 26 L(mm) W(mm) H(mm) D(mm) A(mm) B(mm) X(mm) UBTC30BVT 50 mini UBTCC60BVT 50 mini 50 mini UBTCC60BVPF.1 50 mini UBINDECO60PF Under any circumstances, make sure the hob is well ventilated and the air inlet and outlet are not blocked. Ensure the hob is in good work state. As shown below Note: The safety distance between the hotplate and the cupboard above the hotplate should be at least 760mm.
-
Page 27: Before Locating The Fixing Brackets
Before you install the hob, make sure that the work surface is square and level, and no structural members interfere with space • requirements. the work surface is made of a heat-resistant material. • if the hob is installed above an oven, the oven has a built-in cooling fan. •... - Page 28 UBTC30BVT UBTCC60BVT / UBTCC60BVPF.1 UBINDECO60PF...
-
Page 29: Connecting The Hob To The Mains Power Supply
Cautions The hob must be installed by qualified personnel or technicians. We have professionals at your service. Please never conduct the operation by yourself. The hob shall not be mounted to cooling equipment, dishwashers and rotary dryers. The hob shall be installed such that better heat radiation can be ensured to enhance its reliability. - Page 30 UBTCC60BVPF.1 / Power cord type: 5*1.5mm , H05GG-F or H05BB-F UBINDECO60PF / Power cord type: 5*1.5mm , H07RN-F or H05BB-F; 3*1.5mm , H05RR-F Before installing the cable, read the manual especially the “Safety Warnings” section. Model UBTCC60BVPF.1/UBINDECO60PF must be connected to the suitable cable only by a qualified electrician.
- Page 31 If the cable is damaged or needs replacing, this should be done by an after-sales technician using the proper tools, so as to avoid any accidents. If the appliance is being connected directly to the mains supply, an omnipolar circuit breaker must be installed with a minimum gap of 3mm between the contacts.
- Page 32 Energy data sheet...
- Page 36 For more detailed information about treatment, recovery and recycling of for special treatment is this product, please contact your local city office, your household waste necessary. disposal service or the shop where you purchased the product. UBTC30BVT&UBTCC60BVT&UBTCC60BVPF.1&UBINDECO60PF User Manual v.20171023...
Need help?
Do you have a question about the UBTC30BVT and is the answer not in the manual?
Questions and answers