Getting Started Mobile device connects to smart WiFi Home Camera directly via App [Unieye Home] for remote control, live view, Widget display and receives push alerts when events are detected. Camera with 300° pan motor could be remote controlled by Wi-Fi and Bluetooth. For initial use, mobile device needs to: 1.
Wireless & App Operation Run App [Unieye Home] on mobile device and navigate either one of modes: (I) Internet Mode - Internet (II) Local Mode - Direct control Unieye Home Internet Mode Local Mode 【 Internet Mode 】 Mobile device connects to camera via internet for remote control, live view, pan angel change, camera setup, push notification, Widget display and the instant live view from partner's camera.
【 Internet Mode 】 Before using 【 Internet Mode 】 on mobile App, ensure WiFi on mobile device is on and network indicator on camera shows steady purple. Mobile Device Connects to Camera 1. For Android: Turn on [Wi-Fi]. For iOS: Go to [Settings] [Wi-Fi].
Page 6
Remote Control : Items Descriptions Talk to camera from mobile. Mute the sound from camera. Shoot videos or take photos and save to storage on mobile "Album\Unieye Home\“ Pan camera view angel. Advance Setup Items Descriptions Items Descriptions Rescan for cameras Delete camera Switch to local mode Tip for help...
Page 7
Cloud Video Recording Cloud Video Recording (CVR) saves videos and images in your cloud account. For initial use, cloud account should be authenticated. 1. Go to [Setup] Turn on [Save to CVR] 2. Select a cloud account and enter account information.
【 Local Mode 】 Tap [ ] and select [Local Mode] to switch to Local Mode . Local Mode Main Page Remote Control Page Events (for camera) Items Descriptions View or delete recorded video files saved in camera Camera Videos SD card during motion and noise detection.
Page 9
Control Camera Angle Set up camera lens angle by using APP. 1. Click [ Pan] . 2. Click arrows for control the lens angle. 3. Tap [ ] to set camera angle back to latest setup. Note: Don't manual to rotate the hinge, please use the app program to control the motor and rotate the hinge.
Page 10
Camera Hotkey Camera Hotkey Forced Shutdown Press and hold for 5 seconds to turn off camera. • Camera: Open the top cover. Insert a small thin paper clip into the hole and press lightly to reset. Forced Factory • Mobile: Go to App [Unieye Home] Connect Settings 【...
Troubleshooting Situation Cause/Solution Camera cannot turn on Power is low. Recharge battery Press and hold for 5 seconds to force turn Camera is frozen off; press again to power on • No microSD card or microSD card is full • microSD card cannot be recognized Camera cannot record •...
Page 12
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the IPC2201 and is the answer not in the manual?
Questions and answers