Advertisement
In the Program Installation sub-menu, program settings can be set. When this menu is open, all the
protections are inactive.
• Program No.: The program type can be selected with the cursor left/right buttons. These buttons
will toggle between all available types: "TV", "INFO", "PAYTV" and "RADIO".
If the program number of a certain type is 0, the corresponding type is not displayed. In order to
display a program number of the above-mentioned types, always enter two numbers, for example:
"01" for TV1 or digit "1" and up/down cursor.
• Input: The "Input" menu item selects the desired input source that will be assigned to the program.
Possible values are TUNER, AV1, AV2, S-VIDEO, SIDE AV, SIDE S-VIDEO, CARD-CVBS,
CARD-YC, EXT4, CARD-EXT4, HDMI1 and HDMI2. Some input sources may not be available
on certain sets (see accompanying table).
Model / Input
AV1
26HF5444
Scart1
26HF7874
Scart1
32HF7444
Scart1
32HF7874
Scart1
37HF7444
Scart1
Note: When a SmartCard XPress Box is used, it is usually connected to Scart1.
AV2
Side AV
Scart2
AV-In
CVBS
Scart2
AV-In
CVBS
Scart2
AV-In
CVBS
Scart2
AV-In
CVBS
Scart2
Video In
CVBS
- 7 -
Side S-Video
EXT4
S-Video In
YPbPr
S-Video In
YPbPr
S-Video In
YPbPr
S-Video In
YPbPr
S-Video In
YPbPr
HDMI
HDMI1 /
HDMI2
HDMI1 /
HDMI2
HDMI1 /
HDMI2
HDMI1 /
HDMI2
HDMI1 /
HDMI2
Advertisement
