Marshalltown PRO TILE CUTTER PTC24 Manual page 2

INTRODUCTION
Thank you for purchasing the MARSHALLTOWN 24" (610mm) Pro Tile Cutter. This innovative Tile Cutter allows
you to make quick, clean, score-and-snap cuts.
Other features of your Tile Cutter include:
• Aluminum die cast base with engraved mm and inch measurements
• 8mm thick base rubber pads
• Monorail sliding system with smooth 6-piece bearing operation
• Curved aluminum handle with comfortable cushion grip
• Adjustable height cutting wheel allows for 4 levels of scoring for different tile thicknesses
• Padded aluminum side swing extension arms
This Tile Cutter can cut tile up to 5/8" (16mm) thick and 243/4" (630mm) long, including:
• Ceramic Tile
• Porcelain Tile
• Glass Tile
• Mosaic Tile*
*Does not cut flexible backing to mosaic tile products
This owner's manual provides the information needed to operate and maintain this Tile Cutter. Carefully
read and follow all safety and operating instructions in this manual. Ensure every operator of this Tile Cutter
reads this manual before operating the unit. The replacement of any part on this Tile Cutter by other than the
manufacturer's authorized replacement part may adversely affect the performance, durability, or safety of the
product.
Be sure safety precautions are observed. Read and follow all safety and operating instructions in this
operator's manual. The manufacturer reserves the right to make changes on or add improvements to its
product at any time without prior notice or obligation. The manufacturer reserves the right to decide, upon its
sole discretion and at any time, to discontinue this product.
This manual covers the MARSHALLTOWN 24" (610mm) Pro Tile Cutter. For technical questions or repair parts,
please call MARSHALLTOWN customer service at 1-800-888-0127 or visit www.MARSHALLTOWN.com.
2 of 8
WS2733revA
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com