Advertisement
Quick Links
Banter Kit Instructions
*Charge all units before first-time use.
Power on and off
All units should come paired with the hub, so should automatically pair with the hub when
powered on. There are pairing instructions below if needed. Power on by briefly pressing the
volume down button. Power off by holding the volume down button for 4 seconds. This is the
same for both hub and body pack units. Power status indicated by Power LED.
Power LED colour
Green
Amber
Red
None
Use latch PTT on headset to talk over the duplex system. Range will be best when belt pack is
worn higher up on the body.
Belt Pack Function
1
Volume down button
2
Volume up button
3
PTT button
4
Power indicator
5
Status indicator
6
Charge indicator
7
Headset and charging port
Hub Function
Power button
Pairing button
-
Power indicator
Status indicator
Charge indicator
Charging port
Meaning
On with good battery
On with low battery
On with critical battery warning
Off
Advertisement
Summary of Contents for Big Blue Banter Kit
- Page 1 Banter Kit Instructions *Charge all units before first-time use. Belt Pack Function Hub Function Volume down button Power button Volume up button Pairing button PTT button Power indicator Power indicator Status indicator Status indicator Charge indicator Charge indicator Headset and charging port...
- Page 2 Pairing Process Pairing information is stored between power cycles – the belt packs will come paired with the hub, but follow pairing process below if belt packs need to be paired to hub for any reason. Work with one belt pack at a time (all other belt packs powering off). 2.
- Page 3 Unit will not power down Ensure the volume down/power button is being held for at least the allotted 4 seconds. If there is no response, please contact Big Blue. Hub will not enter into pairing mode when the pair button is held Step 3 of the pairing process.