Service Manu; 2-1Service Menu Operation Method - Panasonic BT-LH900P Service Manual

2. Service menu
2-1. Service Menu Operation Method
1. While simultaneously pressing the [ INPUT] and [MENU/EXIT] button and the [ HD ZOOM/ ] button, switch on
the unit's power .
2. Press the [MENU/EXIT] button once again. The service menu appears on the LCD. Press the [
[ ] button to select the item, then press [ENTER]. The screen to change the item appears.
3. Turn off the power and turn it back on to cancel a service menu display.
[SERVICE MENU]
GPI CHECK
ADC CHECK
INITIALIZE
TIME
BRIGHT MODE
ENGINEER PAGE
SOFT VER.
FPGA1 REV.
FPGA2 REV.
Setting items
GPI CHECK
ADC CHECK
INITIALIZE
TIME
BRIGHT MODE
ENGINEER PAGE
SOFT VER
FPGA REV
FPGA REV
ALL
NORMAL
1.0.10
13
14
Options
ALL/
SET UP/
HOUR METER/
GAMMA/
ADC
NORMAL/
CONNECT
---
---
---
Content and descriptions
Checks the function of the GPI terminal.
Sets the automatic adjustment of the ADC value.
Initialize the each data.
ALL: SET UP and HOUR METER data.
SET UP: menu, function button, image controls data.
HOUR METER: hour meter data.
GAMMA: Not used
ADC : Not used
Displays and clears the time on each hour meter.
OPERATION :Displays the operation time.(Can not reset)
LCD :Displays the LCD operation time.(Can be reset)
BACKLIGHT :Displays the BACKLIGHT operation time.(Can be
reset)
Controls the operation of the image controls.
NORMAL: Normal operation
CONNECT: Connects with the BACKLIGHT
Not used
Shows the version of the software.
Shows the revision of the FPGA1.
Shows the revision of the FPGA2.
INF-3
button and