Table of Contents
Advertisement
15 Update GoGear
Opus
GoGear opus is controlled by an internal
program called firmware. Newer versions of
the firmware may have been released after you
have purchased GoGear opus.
The software program called Philips Device
Manager can use your computer to check for
firmware updates that are available on the
Internet.
Install Philips Device Manager on your
computer from GoGear opus or download the
latest version from www.philips.com/support.
Note
•
Your music files are not affected by a firmware
update.
Manually verify / update
firmware
1
Ensure that your computer is connected
to the Internet.
2
Connect GoGear opus to the computer
(see section Connect and charge for
instructions).
3
on your computer, click Start >
Programs > Philips Digital Audio Player
> Opus Device Manager to launch Philips
Device Manager.
4
Click Update
» Philips GoGear Opus Device Manager
checks for updates and installs new
firmware from the Internet, if available.
5
When the display shows Update
completed, click OK.
6
Disconnect GoGear opus from the
computer.
»
The display of GoGear opus shows
Updating firmware
»
GoGear opus restarts after the
firmware is updated and is ready for
use again.
EN
33
Advertisement
Table of Contents
