Download Print this page

Lithium Battery; Installation Guide - RAKwireless 7249 Installation Manual

Solar panel and battery kit

Advertisement

2.2 Lithium Battery

1. Electrical Characteristics
Electrical spec.
Nominal Output Voltage
Nominal Output Current
Capacity
Charge Voltage
2. Operational Temperature: -20˚C ~ 60˚C
3. Dimensions: 140*90*350mm

3. Installation guide

Step 1: Install the bolts in the holes, which are circled in red in the following Figure.
Tighten the nuts and make sure that the rails that make up the base are holding tight
against each other.
This will make an "H" spahepd base, for the Solar Panel to be mounted on top off. The
circular pipe in the middle of the sape is mean to fit over a circular shaped pole, so the
whole construction sits on top with the panel facing upwards, on an angle.
12.6V
2A
50Ah
18V
7249
RAK
5
5

Advertisement

loading