Know Your Breville Jet Select Iron; Operating Your Breville Jet Select Iron; Setting The Temperature - Breville Jet Select BIR100 Instructions For Use Manual

Know your Breville Jet Select Iron

Spray button
Conveniently positioned
for a fine mist spray
Shot of steam button
For an extra burst of steam
Steam selector
Select from 5 variable steam
settings plus the DRY setting
for dry ironing
Water filling cap
To prevent lint from
entering the water tank
and to stop water spilling
from the iron
Maximum water
level line
Directional
steam tip
Vertical shot of steam
The directional steam at the
For steaming curtains and
soleplate tip allows you to
suits, and removing creases
iron collars, cuffs and
from delicate fabrics.
pockets effortlessly.
Large 350ml water tank
Soleplate
for model BIR100
Polished Aluminium
Large 320ml water tank
Soleplate (model BIR100)
for model BIR150
Teflon Non-stick Soleplate
(model BIR150)
6
Power 'on' light
Indicates that power has been
turned on at the power outlet
Temperature dial
3m power cord
For selection of required
For easy manoeuvring,
temperatures from minimum
includes a clip for
for synthetics through to
tidy storage
maximum for linen
Temperature
indicator light
Turns off when
the selected
temperature has
been reached
Cord wrap facility
For convenient storage
of the power cord
In-built anti-calc system
The in-built anti-calc feature
removes any scale build up and
impurities, which results in a
longer life for your iron
- Model BIR150 only
Anti-drip feature
Prevents leaking of water from soleplate
when ironing at low temperatures
Water filling beaker – not shown

Operating your Breville Jet Select Iron

Before first use
Remove any promotional material from the iron.
Remove any sticker or protective cover from the
soleplate.
When operating the iron for the first time, iron on an
old piece of fabric to ensure that the soleplate and
water tank are completely clean.
When the iron is used for the first time some vapour
may be emitted. After a short while however, this
will cease. The vapour is due to the initial heating of
the materials used in the iron. It is safe and will not
harm the performance of the iron.

Setting the temperature

Step 1.
Before commencing ironing, sort all items to be -
ironed according to the fabrics requiring the coolest
temperatures first and then work through to the
fabrics requiring the higher temperatures.
Step 2.
Stand the iron on its heel and ensure that the
temperature dial is turned to the minimum (MIN).
Step 3.
Plug the power cord into a 230/240V power outlet
and turn the power on.
THE JET SELECT IRON INCORPORATES A THERMAL SAFETY FUSE TO PROTECT THE IRON FROM
OVER-HEATING. HOWEVER THE IRON SHOULD NOT BE LEFT UNATTENDED WHILE IT IS
CONNECTED TO THE POWER OUTLET. SPECIAL CARE SHOULD ALWAYS BE TAKEN WHEN THERE
ARE CHILDREN IN THE HOME/VACINITY OF THE IRON.
Step 4.
Select the temperature setting required by rotating
the temperature dial so that the desired setting is
aligned with the heating indicator light.
Step 5.
The heating indicator light will illuminate, indicating
that the iron is heating up. When the indicator light
goes out, the iron has reached the selected
temperature and is ready for use. The light will cycle
on and off as the thermostat maintains the selected
temperature.
The heating indicator light is sealed in a plastic
tube and does not come into contact with the
water in the water tank.
Note
7