Table of Contents
Advertisement
Time Live: it is the frame display rate in the Live page. The inserted value will define the frame update
frequency (expressed in seconds) in the Live page. The minimum value is 1 second. To display the
Live page through the GPRS network we suggest to use values higher than 5 seconds.
Alarm simulation: in the Vega Video GPRS this command allows for an alarm simulation: in this way you
may check the correct settings for the Internet connection (GPRS values) and the correct inserting of
the phone numbers that will receive an alarm SMS message.
Hangup: from this field you can operate the disconnection, when the Vega Video GPRS is connected to the
Internet. After selecting Enabled and clicking the SAVE button, you will lose the remote connection to
the Vega Video GPRS. For an automatic disconnection, please refer to the Connection timeout section
in the Gprs menu.
Delete Alarm Area: by selecting the Enabled item and clicking the SAVE button you may remove the
images stored to memory dedicated to the alarm event images. We suggest to view the images before
removing them. With the Vega Video GPRS version, the user will be alerted on the full memory status
with an alarm SMS message announcing "MEMORY FULL".
35
Advertisement
Table of Contents
