Download Print this page

LAPP MODE3 2.0 Operating Instructions

Cable assemblies/charging cable

Advertisement

Quick Links

OPERATING INSTRUCTIONS
CABLE ASSEMBLIES/CHARGING CABLE MODE3 2.0
Type 2 to type 2, and further, in according to IEC 62196
Lapp Mobility GmbH, Stuttgart-Germany
For model:
„M32-T2Pm-T2Cm-swsw-S-32A3P-xxxx"
„M32-T2Pm-T2Cm-swsw-S-32A1P-xxxx"
Explanation:
M32-T2Pm-T2Cm-swsw-S-20A1P-xxxx
Colour top cover and bottom cover „sw" = black
Type 2 plug, right side, assembled
Type 2 plug, left side, assembled
Mode 3 2.0
INTENDED USE
The charging cable Mode3 (type2 to type2, IEC), and
others, according to IEC 62196, is intended for charging
electric and hybrid vehicles at suitable charging
infrastructure with charging point marking, e.g. "C",
according to EN 17186.
plug with a voltage range ≤ 480 VAC.
Any use other than the use permitted by Lapp Mobility
GmbH is not permitted. This charging cable is only safe
if the operating instructions are observed.
USE NOT IN ACCORDANCE WITH THE INTENDED PURPOSE
Improper use increases the risk of damage to property
and health. Avoid the following actions at all costs:
• Modify/manipulate the lead set/charging cable
• Connecting the charging cable to unsuitable plugs
• Driving over the cable assemblies/charging cable
Cable length xxxx in mm
Maximum charging current and number of phases
Cable design „S" = straight
marking stands for type 2
„M32-T2Pm-T2Cm-swsw-S-20A3P-xxxx"
„M32-T2Pm-T2Cm-swsw-S-20A1P-xxxx"
Before using the charging cable, read these operating
instructions and follow their instructions. Please keep
the operating instructions. In addition to these operating
instructions, also observe the documentation for your
electric and hybrid vehicle and for your charging station.
Failure to follow these instructions may result in damage
to the Mode3 charging cable. Furthermore, this is
associated with dangers such as electric shock, short
circuit or fire.
• Using defective charging cables
The operator, not the manufacturer, is responsible for
all personal injury and property damage resulting from
improper use. Lapp Mobility GmbH accepts no liability
for damage resulting from improper use.
EN

Advertisement

loading
Need help?

Need help?

Do you have a question about the MODE3 2.0 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for LAPP MODE3 2.0

  • Page 1 ≤ 480 VAC. Failure to follow these instructions may result in damage Any use other than the use permitted by Lapp Mobility to the Mode3 charging cable. Furthermore, this is GmbH is not permitted. This charging cable is only safe associated with dangers such as electric shock, short if the operating instructions are observed.
  • Page 2 SAFETY INSTRUCTIONS • Children must not use the cable assemblies/charging • The use of the cable assemblies/charging cable is cable! not permitted in explosive environments or in rooms • Keep animals away from the cable assemblies/charg- containing flammable liquids, gases or dusts - risk of ing cable.
  • Page 3 Wind up the cable set/charging cable without bending it and stow it in the designated place in the vehicle. Temporarily storing the Mode3 2.0 charging cable in the luggage compartment is unproblematic up to a temperature of 65 °C. CLEANING...
  • Page 4 Oskar-Lapp-Str. 2 · D-70565 Stuttgart 70565 Stuttgart Tel.: +49 711 7838 - 7070 www.lappmobility.com Germany info.lmd@lappmobility.com www.lappmobility.com V1.1 ©2022 Lapp Mobility GmbH · Reprint or copy, even only in extracts, is only permitted with written consent of LAPP Mobility GmbH...