Page 1
Digital teSt light & Voltmeter 66804 Set up anD operating inStructionS ® Distributed exclusively by harbor Freight tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com read this material before using this product. Failure to do so can result in serious injury.
Use caution when working near volt- not avoided, could result in ages above 48 VDC. Voltages this minor or moderate injury. high present a risk of electric shock. Connect in parallel with circuit. For technical questions, please call 1-800-444-3353. SKU 66804 Page 2...
Page 3
Remove any metal items such as jewelry before working with electricity. Wear ANSI-approved impact safety goggles. Only use accessories supplied with this meter. For technical questions, please call 1-800-444-3353. SKU 66804 Page 3...
Plastic Frame to the Adaptor. general operating instruction Do not test voltage on DC circuits higher than 48 volts. Attach the Negative Charge Clip to a good ground. SKU 66804 For technical questions, please call 1-800-444-3353. Page 4...
Check for cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation. aFter uSe, clean external surfaces of the tool with clean cloth. For technical questions, please call 1-800-444-3353. SKU 66804 Page 5...
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 For technical questions, please call 1-800-444-3353. SKU 66804 Page 6...
Need help?
Do you have a question about the 66804 and is the answer not in the manual?
Questions and answers