Office Star Products WD5360 Operating Instructions

WD5360/WD5361/WD5340/WD5341 Fauteuil PréSiDeNt eN MailleS
iNStructiONS De MONtaGe
7
8,12,11
9,12,11
8,12,11
13r
9,12,11
14
10,15
5
9,15
8,12,11
4
9,12,11
3
1
Enlever.toutes.les.pièces.du.carton,.les.organiser.selon.les.numéros.de.pièce.
indiqués.sur.la.liste.et.s'assurer.que.les.quantités.des.pièces.reçues.sont.correctes .
étaPe 1.
.Insérer.les.cinq.Roulettes.(2).dans.la.Base.(1) . . .Insérer.le.Vérin.
Pneumatique.(3).dans.la.Base.(1).et.glisser.le.Soufflet.(4).sur.le.Vérin.Pneumatique.(3) .
étaPe 2.
.Attacher.la.Plaque.Du.Siège.(5).au.Coussin.Du.Siège.(6).avec.la.flèche.orientée.vers.l'avant.du.fauteuil,.en.utilisant.deux.Vis.
Longues.(9),.deux.Rondelles.D'arrêt.à.Bague.Fendue.(12).et.deux.Rondelles.Plates.(11).sur.l'avant.du.Coussin.Du.Siége.(2),.et.utilisant.deux.
Vis.Courtes.(8),.deux.Rondelles.D'arrêt.à.Bague.Fendue.(12).et.deux.Rondelles.Plates.(11).sur.l'arrière.du.chais . .
RESSERRER COMPLÈTEMENT LES QUATRE VIS.
étaPe 3.
Attacher.le.Support.Du.Dossier.(14).au.Coussin.Du.Siège.(6).à.l'aide.de.deux.Vis.Longues.(9),.deux.Rondelles.D'arrêt.à.Bague.
Fendue.(12).et.deux.Rondelles.Plates.(11).sur.l'avant.du.Coussin.Du.Siège.(6),.et.de.deux.Vis.Courtes.(8),.deux.Rondelles.D'arrêt.à.Bague.
Fendue.(12).et.deux.Rondelles.Plates.(11).sur.l'arrière.du.Coussin.Du.Siège.(6) . . .RESSERRER COMPLÈTEMENT LES VIS.
NOTE IMPORTANTE: S'ASSURER D'AVOIR ASSEMBLÉ LE SUPPORT DU DOSSIER (11) COMME MONTRÉ DANS LE DESSIN DÉTAILLÉ A.
étaPe 4.
Aligner.les.trous.dans.les.Bras.(13L.et.13R).sur.les.trous.dans.le.Coussin.Du.Siège.(6).et.Coussin.Du.Dossier.(7) . . .Utilisant.
deux.Vis.Longues.(9).pour.chaque.bras,.attacher.les.Bras.(13L.et.13R).au.Coussin.Du.Siège.(6).et.utilisant.une.Vis.Pour.Les.Bras.-.
Diamètre:. 5 / 16.Po.(10).pour.chaque.bras,.attacher.les.Bras.(13L.et.13R).au.Coussin.Du.Dossier.(7) . .
.RESSERRER COMPLÈTEMENT TOUTES LES VIS.
étaPe 5.
Couvrir.les.vis.dans.les.bras.avec.des.six.Couvercles.en.Plastique.(15) .
étaPe 6.
Placer.le.siège.assemblé.sur.le.dessus.du.Vérin.Pneumatique.(3).et.pousser.vers.le.bas .
ATTENTION: AVANT D'UTILISER LE FAUTEUIL, S'ASSURER D'AVOIR RESSERRÉ COMPLÈTEMENT TOUTES LES VIS.
DeSSiN Détaillé a:
installer le Support Du Dossier (14) sur
la Plaque Du Siège (5).
8,12,11
10,15
13l
9,15
14
6
8,12,11
Pièce
1. Base. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2. Roulettes.. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3. Vérin.Pneumatique . . . . . . . . . . . . . . . . . . . . . 1
4. Soufflet . . . . . . . . . . . . . . . . . . . . . . 1
5. Plaque.Du.Siège. . . . . . . . . . . . . . . . . . . . . . . 1
6. Coussin.Du.Siège. . . . . . . . . . . . . . . . . . . . . . 1
7. Coussin.Du.Dossier.. . . . . . . . . . . . . . . . . . . . 1
8. Vis.Courtes. . . . . . . . . . . . . . . . . . . . . . . . . . . 4
9. Vis.Longues . . . . . . . . . . . . . . . . . . . . . . . . . . 8
10. Vis.Pour.Les.Bras.-.Diamètre:. 5 / 16.Po. . . . . 2
11. Rondelles.Plates . . . . . . . . . . . . . . . . . . . . . 8
12. Rondelles.D'arrêt.à.Bague.Fendue. . . . . . . 8
13. Bras.Gauche.(13L).et.Droit.(13R). . . . . . . . . . . . 2
14. Support.Du.Dossier.(Préinstallé) . . . . . . . . . . 1
2
15. Couvercles.en.Plastique. . . . . . . . . . . . . . . . 6
16. Clé.Allen.(Non.Montrée). . . . . . . . . . . . . . . . 1
©.Office.Star.Products.Mai.2006
WD5360/WD5361/WD5340/WD5341 executive leather chair
9,12,11
5
1
Qté
1 1
Warranty
Work Smart chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 15 Years on all non-moving metal parts.
• 5 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• We cannot warrant leather against routine scratching and scuffing, as all leather is subject to minor blemishes in use.
To make a warranty claim, contact Parts Department. Provide model number and description of the problem and obtain
return authorization. At it's option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component. The customer must prepay freight on any components returned to the factory.
Return freight on components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing
250 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of
nature or any other event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use.
Liability for incidental or consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is
more than 40 hours per week, a two year warranty on all parts applies. Fabric and foam is warranted for one year.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
All Work Smart chairs are built to meet or exceed ANSI BIFMA standards.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when
parts are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact
us via e-mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday
8:00 a.m. - 5:00 p.m. Pacific Time.
OPeratiNG iNStructiONS
FEATURE
• heiGht aDJuStMeNt
To raise seat remove pressure from seat and lift lever (1). To lower
seat height sit on chair and lift lever (1).
• lOcKiNG tilt aDJuStMeNt
For individual comfort, this chair has been equipped with an
adjustment that will allow the user to change the tension of the
tilting feature. Turn knob (2) clockwise to increase tension and
counter-clockwise to decrease or ease the tension. To lock return
chair to the upright position and push lever (1) in. To unlock pull
lever (1) out.
NOte:
Be careful not to loosen back tilt adjustment knob
2
completely.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts, screws and knobs are
securely tightened.
3. Check that all bolts screws and knobs are tight every three
months or as needed.
4. Do not overturn back tilt knob when decreasing tension.
5. Dispose of packing material properly. Do not use plastic cover
as head covering. It may cause suffocation.
2
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.