Table of Contents
Advertisement
6
HOUSEHOLD TRASH COMPACTORS - UL 1086
FEBRUARY 1, 1996
3.1.2 A component shall be used in accordance with its recognized rating established for the intended
conditions of use.
3.1.3 Specific components are recognized as being incomplete in construction features or restricted in
performance capabilities. Such components are intended for use only under limited conditions, such as
certain temperatures not exceeding specified limits, and shall be used only under those specific conditions
for which they have been recognized.
3.2 Units of measurement
3.2.1 If a value for measurement as given in these requirements is followed by an equivalent value in
other units, in parentheses, the second value may be only approximate. The first stated value is the
requirement.
3.3 References
3.3.1 In the following text, a requirement that applies only to a specific type of trash compactor is so
identified by a specific reference in that requirement to the type involved. Absence of such specific
reference or use of the term appliance indicates that the requirement applies to all trash compactors
covered by this standard unless the context indicates otherwise.
3.3.2 Any undated reference to a code or standard appearing in the requirements of this standard shall
be interpreted as referring to the latest edition of that code or standard.
4 Field-Attached Accessories
4.1 The requirements in 4.2 – 4.6 apply to accessories intended for installation on or connected to an
appliance for the purpose of modifying or supplementing the functions of the appliance or accessory.
4.2 An appliance having provision for the use of accessories to be attached in the field shall be
constructed so that the use of these accessories will not introduce a risk of fire, electric shock, or injury
to persons.
4.3 Acceptable receptacles and plug-in connectors shall be provided for the installation of an accessory
intended to be installed by the operator.
4.4 Terminals in an appliance and wire connectors are an acceptable means for the installation of an
accessory intended to be installed by qualified personnel.
4.5 An installation that necessitates field rearrangement of components or wiring, cutting or splicing of
wiring, or soldering of connections is not acceptable.
4.6 An accessory is to be tested and trial-installed to determine whether its installation is feasible,
whether the instructions are detailed and correct, and whether use of the accessory introduces a risk of
fire, electric shock, or injury to persons.
CONSTRUCTION
5 General
5.1 An appliance shall employ materials that are acceptable for the use.
Advertisement
Table of Contents
