Do you have a question about the DL12 and is the answer not in the manual?
Questions and answers
Geoff Wallwork
March 29, 2025
Strange one, it’s been working great
Works great on 24 volt in the truck and at home on 240v. Plugged it in at home this week and both temps rise can’t hear compressor kick in, it has done it before can’t remember how I reset it.
Thanks
1 comments:
Mr. Anderson
March 29, 2025
To reset the Dellonda DL12 when the temperatures rise and the compressor does not kick in, turn off the unit and leave it off for 30 minutes. Then restart the unit.
Page 1
Fridge Freezer/Cool Box, Car/Camping, 12/24/230V Model No. DL12 Thank you for purchasing a Dellonda product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. DL12 Issue:1 22/04/2020...
Page 2
Class II symbol. Inspect power supply leads, plugs and all electrical connections for wear and damage. Dellonda recommend that an RCD (Residual Recommended fuse rating: Current Device) is used with all electrical A) Connect the products.
Page 3
• For more soiled surfaces use a neutral • SPECIFICATION detergent, wipe down with a clean damp cloth • Model no.:..........DL12 and dry thoroughly with a clean dry cloth. • Capacity............15L • To defrost the unit, power it off, raise the lid, •...
Page 4
No parameter detected by controller. Restart unit. F7/F8 Temperature sensor error. Turn off and restart unit. If the issue is not resolved by carrying out the above procedures please contact Dellonda. Environment Protection and Waste Protection and Electrical Equipment Regulations (WEEE) Recycle unwanted packaging materials.
Need help?
Do you have a question about the DL12 and is the answer not in the manual?
Questions and answers
Strange one, it’s been working great Works great on 24 volt in the truck and at home on 240v. Plugged it in at home this week and both temps rise can’t hear compressor kick in, it has done it before can’t remember how I reset it. Thanks
To reset the Dellonda DL12 when the temperatures rise and the compressor does not kick in, turn off the unit and leave it off for 30 minutes. Then restart the unit.
This answer is automatically generated