Advertisement
Quick Links
Advertisement
Summary of Contents for impey Slimline 35
- Page 1 Slimline 35 Shower Tray Installation Guide SHOWERING FOR THE CARE MARKET L700211 Issue 3 04/04/2022...
- Page 2 Slimline 35 Shower Tray Installation Guide SHOWERING FOR THE CARE MARKET SAFETY Please read this installation instructions carefully before proceeding. Keep guide for future reference. If you are unsure about any part of the installation, please contact our Technical Department on: 01460 258682.
- Page 3 Slimline 35 Shower Tray Installation Guide SHOWERING FOR THE CARE MARKET Component Content List (optional) (optional) (supplied as standard) (optional) IMOR/P 90mm SLW2STCP/H 90mm IMOR/H 90mm (22mm outlet) (43mm outlet) horizontal waste trap waste trap (43mm outlet) IMOR/V 90mm waste trap...
- Page 4 Slimline 35 Shower Tray Installation Guide for wooden floors SHOWERING FOR THE CARE MARKET Check if floor is level. If it is not, this will need to be corrected before continuing with the installation Place the tray in the desired location and mark position of Determine which corner the tray is to be fitted into.
- Page 5 Slimline 35 Shower Tray Installation Guide for wooden floors SHOWERING FOR THE CARE MARKET Remove first 10cm of release paper in one smooth action, then Using a roller press tape into place firmly. Ensure air gaps or continue removing the paper while carefully applying tape with creases are removed.
- Page 6 Follow steps 6-12 (installation guide for wooden floors) to complete the installation of Slimline 35 Shower Tray Lay a weak sand cement mix in the excavated hole and around the waste pipe and trap.
- Page 7 Slimline 35 Shower Tray Level Access Installation Guide SHOWERING FOR THE CARE MARKET for wooden floors Measure from the outer edges of the tray to the centre of the drain. Use these dimensions to position the centre of the waste gully.
- Page 8 Slimline 35 Shower Tray Level Access Installation Guide SHOWERING FOR THE CARE MARKET for wooden floors vinyl floor covering plywood etc. Apply the fabric tile upstand (stages 6-10 main installation), Install finished floor covering. then connect and reassemble the trap.
- Page 9 Slimline 35 Shower Tray Level Access Installation Guide SHOWERING FOR THE CARE MARKET for concrete floors Measure from the outer edges of the tray to the centre of the drain. Use these dimensions to position the centre of the waste gully.
- Page 10 Slimline 35 Shower Tray Installation Guide SHOWERING FOR THE CARE MARKET Variable Length Minimum achievable length 1310mm Minimum achievable length 1310mm 1310mm 110mm 110mm 500mm offcut 1700mm 1200mm Measure the area where the tray will be installed. Place the endcap Trim the tray using a fine blade saw, excercising extreme care not to in the desired location.
- Page 11 Batten 22mm Floor Boards Diagram 1. Cross section of Slimline 35 Shower Tray and joists. Vinyl Flooring Slimline 35 Shower Tray Weak Sand Cement Mix Concrete Diagram 2. Cross section of Slimline 35 Shower Tray and concrete floor. Page 10...
- Page 12 SHOWERING FOR THE CARE MARKET IMPEY SHOWERS LIMITED, CONQUEST BUSINESS PARK, ILTON, SOMERSET TA19 9EA TEL: 01460 256080 | EMAIL: technical.support@impeyshowers.com www.impeyshowers.com facebook.com/impeyshowers @impeyshowers...