Table of Contents
Advertisement
3
1
2
Note
•
If you are not going to use the remote control
for a long time, remove the batteries.
•
Do not use old and new or different types of
batteries in combination.
•
Batteries contain chemical substances, so they
should be disposed of properly.
Connect power
Caution
•
Risk of product damage! Ensure that the power
voltage corresponds to the voltage printed on
the back or underside of the apparatus.
•
Risk of electric shock! When you unplug the
AC adaptor, always pull the plug from the
socket. Never pull the cord.
•
Before connecting the AC adaptor, ensure you
have completed all other connections.
1
Connect the power adaptor to:
•
the
DC IN jack on the main unit.
•
the wall outlet.
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1
Connect the unit to the power supply.
» AUTO INSTALL PRESS -- PLAY
[
KEY](auto install press -- play key) is
displayed.
2
Press
on the main unit to start
installation.
The unit automatically stores radio
»
stations with sufficient signal strength.
When all the available radio stations
»
are stored, the first preset radio station
is broadcast automatically.
Set clock
Note
•
You can set the clock in the standby mode
only.
1
Press and hold PROG/CLOCK SET to
enter the clock setting mode.
» SET CLOCK] (set clock) scrolls on
[
the screen.
2
Press
/
repeatedly to select 12 hour
or 24 hour format.
3
Press PROG/CLOCK SET to confirm.
The hour digits are displayed and begin
»
to blink.
4
Press
/
to set the hour.
5
Press PROG/CLOCK SET to confirm.
The minute digits are displayed and
»
begin to blink.
EN
11
Advertisement
Table of Contents
