To tune to a weak station:
Press
/
repeatedly until you find optimal
reception.
Program FM radio stations
automatically
Note
•
You can program a maximum of 20 preset FM
radio stations.
In FM tuner mode, press and hold PROG for 3
seconds.
» [AUTO] (auto) is displayed.
» The unit stores all the FM radio stations
automatically and then broadcasts the first
preset radio station.
Program FM radio stations
manually
1
In tuner mode, tune to an FM radio
station.
2
Press PROG to activate programming
mode.
» [PROG] (program) blinks.
3
Press / repeatedly to select a
channel number.
4
Press PROG again to confirm.
5
Repeat steps 1-4 to store other FM
stations.
Note
•
To remove a pre-stored station, store another
station in its place.
Select a preset radio station
In tuner mode, press / or the numeric
buttons to select a preset number.
Select stereo/mono broadcast
Note
•
Stereo broadcast is the default setting for
tuner mode.
•
For stations with weak signals: to improve the
reception, change to monaural sound.
In FM tuner mode, press OK to switch between
mono and stereo broadcast.
EN
15