Firmware upgrade
1
a. Check that WAK3300 is connected to an
Access Point with Internet access (see
Installation: Connecting WAK3300 to
a UPnP-enabled music server)
b. Check that the connection profile for
Internet access is applied (see Network
setting: Create a connection profile)
2
Press HOME to enter the main menu, and
then select the Setting menu by pressing the
navigation controls
3
Use the navigation controls
select Device followed by Firmware
The display shows Upgrade to new
firmware?
4
3
4
Press
or
and
The set starts to upgrade the firmware
After firmware upgrading is complete, the
set will restart itself automatically
5
Follow the steps under the Installation chapter
3
4
2
or
and
3
4
2
or
and
2
to select Yes
Renaming the device
1
Press HOME to enter the main menu, and
then select the Setting menu by pressing the
navigation controls
2
Use the navigation controls
to
select Network, followed by Advanced
Setting and Edit Device Name
3
To change current device name, use the
navigation controls
Change name
4
Enter a new device name using the
alphanumeric keys (see Preparation: Using
alphanumeric keys)
or
Press the navigation controls 3 or 4 repeatedly
to select a letter, digit or symbol
Device setting
3
4
2
or
and
3
4
or
and
3
4
2
or
and
to select
2
to
39