Download Print this page

HEATSTRIP THSTAND Assembly Manual

Universal stand

Advertisement

Quick Links

Product Assembly Manual
THSTAND Installation Manual
HEATSTRIP® Universal Stand (THSTAND)
www.heatstrip.com.au
Ph: 03 9562 3455
|
E: sales@heatstrip.com.au

Advertisement

loading
Need help?

Need help?

Do you have a question about the THSTAND and is the answer not in the manual?

Questions and answers

Summary of Contents for HEATSTRIP THSTAND

  • Page 1 Product Assembly Manual THSTAND Installation Manual HEATSTRIP® Universal Stand (THSTAND) www.heatstrip.com.au Ph: 03 9562 3455 E: sales@heatstrip.com.au...
  • Page 2 PROTECTION RATING (Stand Only) IP55 Protection from water ingress from all directions MATERIAL OF CONTRUCTION Stand: Powder coated mild steel Model Dimensions Weight (kgs) THSTAND 2050 x 450 x 450 11.2 Features & Benefits • • Stylish, high quality portable, free-standing outdoor heater stand •...
  • Page 3 While we recommend smaller wattages as its easier to install you can install our larger 3200 or 3600 Watt heaters* on the THSTAND. You must use a licensed electrician to install your heaters as the larger models are 13.3-15 amps and must be hardwired.
  • Page 4 Description Base A (Front) Base B (Back) Base Brackets (x4) Base Feet (x4) Rear Post Bracket Post—Upper Post—Lower Heater Bracket Base Bracket Power cord clips...
  • Page 5 Join the base together • Position the Base as shown in the diagram (1 & 2). • Once the holes are aligned, use 5 Pan Head screws then tighten securely with the nuts provided. QTY: 5 QTY: 5 Adding base fixtures & brackets •...
  • Page 6 Install Base/Post Brackets • Place two Side panels (5) onto the Base. • Install the Left Side Panel to the Lower Post using 2 Screws . Then place the Left back bracket to the Base matching the holes. Once the holes are matching, use 2 Screws to secure*.
  • Page 7 Attach the Heater to the Stand • Using the 2 brackets, attach the brackets to the heater. • Match the brackets to the holes located on the bracket head shown in the diagram. • Using the bolts included with the heater, tighten the heater brackets to the bracket head support securely.
  • Page 8: Warranty Terms And Conditions

    Thermofilm warrants to the original owner that HEATSTRIP Elegance products will be free from defects in materials and workmanship for a period of 24 months from the date of purchase for residential applications and 12 months for commercial applications in accordance with the following warranty terms and conditions.