Aquael OTA-1 User Instruction

Protective face shield

Advertisement

Quick Links

OS£ONA TWARZY OTA-1
PROTECTIVE FACE SHIELD OTA-1
CASQUE A VISIERE DE PROTECTION OTA-1
1.
Zdj¹æ folie ochronne
z obu stron szybki
Remove the protective foil
(applied on both sides).
Enlever les films de protection
de chaque côté de la visière
4.
PL
INSTRUKCJA U¯YTKOWANIA
Konstrukcja
Os³ona twarzy OTA -1 sk³ada siê z szybki przeciwodpryskowej oraz nag³owia wraz z opask¹
pozwalaj¹c¹ na indywidualne dopasowanie nag³owia do obwodu g³owy.
Szybka wykonana z poliwêglanu:
materia³ o najwy¿szej przejrzystoœci wœród stosowanych tworzyw sztucznych,
odporna na dzia³anie œrodków dezynfekuj¹cych, równie¿ na bazie alkoholu.
Wymagania
Os³ony spe³niaj¹ wymagania: normy EN166:2001 (PN-EN166:2005)
indywidualna oczu. Wymagania" oraz Rozporz¹dzenia Parlamentu Europejskiego i Rady
(UE) 2016/425 z dnia 9 marca 2016 r.
Znakowanie i znaczenie u¿ytych symboli
Os³ony s¹ oznakowane jako: AQUAEL OTA-1 EN166:2001 3 CE
Szybki przeciwodpryskowe jako element wymienny znakowane s¹: AQUAEL 1 CE
Znaczenie u¿ytych symboli jest nastêpuj¹ce:
AQUAEL - znak identyfikacyjny producenta,
OTA-1 - typ os³ony.
EN166:2001 - numer normy zastosowanej do wyrobu, EN166:2001, (PN-
EN166:2005) - „ Ochrona indywidualna oczu. Wymagania",
3 - ochrona przed rozbryzgami cieczy,
1 - klasa optyczna,
CE - znak certyfikacji, oznaczenie stwierdzaj¹ce spe³nienie wymagañ
okreœlonych w Rozporz¹dzeniu Parlamentu Europejskiego i Rady (UE)
2016/425 z dnia 9 marca 2016 r.
Zastosowanie
Os³ony twarzy przeznaczone s¹ do:
ochrony przed rozbryzgami cieczy,
os³ony b³on œluzowych ust, oczu i nosa przed kontaktem z zanieczyszczonymi
d³oñmi, przedmiotami oraz drobnymi urazami mechanicznymi.
Monta¿
Sposób z³o¿enia przy³bicy ochronnej zaprezentowany zosta³ na rysunkach 1 - 5.
Dopasowanie nag³owia do obwodu g³owy mo¿liwe jest poprzez regulacjê zapiêcia paska
(rysunek 5). Nale¿y pamiêtaæ o usuniêciu folii ochronnej znajduj¹cej siê po obu stronach
szybki .
W³aœciwoœci ochronne i u¿ytkowe
Szybki przeciwodpryskowe os³on spe³niaj¹ wymagania normy EN166:2001
(PN-EN166:2005) w zakresie:
odpornoœci na zapalenie oraz podwy¿szon¹ temperaturê,
parametrów optycznych.
Jakoœæ optyczna szybki w os³onie, jest zgodna z wymogami dla pierwszej klasy optycznej.
Os³ona nadaje siê do prac ci¹g³ych.
Materia³y, z których s¹ wykonane os³ony, przy kontakcie ze skór¹ u¿ytkownika nie
powoduj¹ reakcji alergicznych u osób wra¿liwych.
Ka¿da os³ona jest pakowana w worek foliowy, a podczas sk³adowania i transportu s¹ one
zapakowane w kartony.
U¿ytkowanie, przechowywanie i konserwacja
Szybkê nale¿y chroniæ przed porysowaniem oraz utrzymywaæ w nale¿ytej czystoœci. Na
powierzchni szybki nie powinno byæ ¿adnych zanieczyszczeñ - py³u, zacieków, odcisków
palców lub œladów zat³uszczeñ. Czystoœæ szybki sprawdza siê ogl¹daj¹c j¹ w œwietle na
ciemnym tle. W celu dok³adnego oczyszczenia szybki nale¿y umyæ j¹ w roztworze wodnym
z powszechnie stosowanymi p³ynami do mycia naczyñ, a nastêpnie sp³ukaæ strumieniem
bie¿¹cej wody i pozostawiæ do wysuszenia. Szybkê uszkodzon¹ lub nadmiernie
porysowan¹ nale¿y wymieniæ na now¹. Os³ony mo¿na u¿ytkowaæ bezterminowo. Os³ony
nale¿y przechowywaæ w takiej pozycji, aby szybki znajdowa³y siê wypuk³¹ powierzchni¹ do
góry, lub zawieszone za nag³owie - bez stykania siê szybki z otaczaj¹cymi przedmiotami.
UWAGA: Pêkniêta lub zadrapana szybka, a tak¿e uszkodzona os³ona musz¹ byæ
bezwzglêdnie wymienione na nowe.
Deklaracja zgodnoœci UE dostêpna jest na stronie: www.aquael.suwalki.pl
2.
5.
Zapinanie paska

Strap fastening

Attacher la sangle de fixation
„Ochrona
SPOSÓB ZAK£ADANIA SZYBKI
Kolejnoœæ zak³adania:
Najpierw wsuwamy koniec szybki przeciwodpryskowej, potem punkty
2,3,4.
W nastêpnej kolejnoœci wsuwamy drugi koniec szybki w zagiêcie 5. Na
koniec naci¹gamy otwór na ko³ek 6
METHOD OF ASSEMBLY:
First, slip the edge of the shield into the point 1 and and then match the
openings to the pins no 2,3 and 4.
Next, slip the second edge of the shield into the point 5. Finally, match the
opening to the pin no 6.
METHODE D'ASSEMBLAGE
Il faut en premier faire glisser le bord dans le point 1 puis faire
correspondre les ouvertures dans les plots de fixation 2, 3 et 4
Ensuite faire glisser le deuxième bord de la visière dans le point 5.
Pour finir, faites correspondre l'ouverture dans le plot de fixation 6.
Dane techniczne / Specifications / Caractéristique techniques
WysokoϾ szybki / Height / Hauteur
SzerokoϾ szybki / Width / Largeur
Masa os³ony /
Cover weight /
Poids du casque à visière
ENG
USER INSTRUCTION

Construction

The protective face shield OTA-1 consists of the impact shield and bracing band with
regulation that you can adjust to fit different head sizes.
The shield is made of polycarbonate:
one of the most transparent materials among plastics ,
resistant to disinfecting substances (including those containing alcohol).

Requirements

The protective face shield meet the requirements of: EN166:2001 "Personal eye-protection
— Specifications" and Regulation (eu) 2016/425 of the European Parliament and of the
Council of 9 March 2016.

The marking and meaning of used symbols

The protective face shield are marked as: AQUAEL OTA-1 EN166:2001 3 CE
The panes as a replaceable element are marked: AQUAEL 1 CE
The meaning of used symbols:
AQUAEL - manufacturer's identification mark,
OTA-1 - protective face shield type,
EN166: 2001 - number of product standard, EN166:2001 - "Personal eye-
protection — Specifications",
3 - protection against liquid splashes,
1 - optical class
CE - certification mark confirming compliance with the requirements specified in
the Regulation of the European Parliament and of the Council (EU) 2016/425 of
March 9, 2016.

Usage

It is used to:
protect against splashing liquids,
protect the mucous membranes of mouth, eyes and nose from contact with
contaminated hands, objects and from minor mechanical injuries.

Assembly

Method of assemly has been presented in the pictures 1-5.
It is possible to adjust the protective face shield to fit different head sizes thanks to a bracing
band with regulation (picture 5). Remove the protective foil (applied on both sides).

Protective and functional properties

Protective face shield meet the requirements of EN166:2001 (PN-EN166:2005) in the
scope of:
resistance to inflammation and elevated temperature,
optical parameters.
The optical quality of the lens in protective face shield
requirements for the first optical class. The cover is suitable for continuous work.
The materials of which the protective face shield are made, do not cause allergic reactions
in contact with the user's skin.
Each item is packed in a plastic bag, and during storage or transport they are packed in
cartons.

Usage, storage and maintenance

Protective face shield must be protected against scratches and kept clean. There should be
no dirt, dust, streaks or fingerprints on the surface of the lens. The clarity should be checked
in the light against a dark background. In order to clean the protective face shield, wash it in
water with commonly used dishwashing liquids, then rinse and leave to dry. A damaged or
excessively scratched visor should be replaced. The protective face shield can be used
indefinitely. The product should be stored in such a position that the lenses are with a convex
surface upwards -without making contact with surrounding objects.
NOTE: A cracked, scratched or damaged product must be replaced.
The EU declaration of conformity is available at: www.aquael.suwalki.pl
3.
220mm
300mm
71g
is in accordance with the
PRODUCENT / PRODUCER / FABRICANT:
AQUAEL Sp. z o.o.
Dubowo Drugie 35, 16-400 Suwa³ki, Polska
www.aquael.suwalki.pl, e-mail: suwalki@aquael.pl

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OTA-1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Aquael OTA-1

  • Page 1 Construction Os³ona twarzy OTA -1 sk³ada siê z szybki przeciwodpryskowej oraz nag³owia wraz z opask¹ The protective face shield OTA-1 consists of the impact shield and bracing band with pozwalaj¹c¹ na indywidualne dopasowanie nag³owia do obwodu g³owy. regulation that you can adjust to fit different head sizes.
  • Page 2 INSTRUCTIONS DE L'UTILISATEUR Assemblage L'écran facial de protection OTA-1 se compose de la visière et d'un bandeau réglable et ajustable à différentes tailles de têtes. Cette visière est en polycarbonate: Ce matériau est l'un des plus transparents pour les plastiques, Résistant aux produits désinfectants (même ceux à...

Table of Contents