Advertisement
Quick Links
Advertisement
Summary of Contents for CASAINC CS-VC109
- Page 1 MM CASA INC CS-VC109 Instruction Manual...
-
Page 2: Table Of Contents
contents Product Introduction Product Operation Product Maintenance Trouble Shooting Safety Introduction Product Parameters... -
Page 3: Product Introduction
Product Introduction Main Body TYPE-C charge cable 2 in 1 flat sucker 4 Hose suction nozzle 5 Blowing nozzle Tips： accessories When cleaning dust, 3,4 can be installed on 1 Tips： accessories When blowing dust, 5 can be installed on 1 Product Operation 一：Charging The battery is not charged at the factory, be sure to fully charge the battery before use. - Page 4 1、 Place the main body on a horizontal countertop Please place the end of the lanyard on （ the table top ） 2、 Connect the USB cable with the charging port on the main body to start charging ,and power indicator flashes,after full charge,the indicator light is always on.
- Page 5 二： Cleaning To prevent blockage of the air passage, large objects like large paper and packing materials should be removed from the area before start cleaning 1、 Press the start button to start cleaning,power indicator light will always on. 2、 Press again the start button to stop cleaning,power indicator light will off. 3、...
- Page 6 B: Replace hose nozzle Insert the flat tube into the suction ① port in the direction shown in the figure (the larger step of the flat tube faces upward). C: Replace the blowing nozzle According to the direction shown in the ①...
- Page 7 Replacing battery Tips: If you need to replace the battery please consult your dealer. Battery is consumable. If the battery life becomes shorter and charging time becomes longer, please replace the battery pack. Indicator light description： A、Press start button, the machine starts working,power indicator light on,it is low speed now,press speed control button to change speed.
- Page 8 dispose of the battery at will. Please treat properly in accordance with government regulations to facilitate the recovery to the corresponding waste battery recycling facilities. Maintenance Press the dust cup button, the suction mouth will open automatically, and the garbage will be poured out Dust button...
- Page 9 Unscrew the dust cup clockwise (the "O" on the main body is aligned with the "▲" on the dust cup), then, take out the dust cup downward Remove the HEPA filter assembly from the dust cup...
- Page 10 Hold it here and lift it Turn counterclockwise and take out the filter, separating the HEPA from the filter HEPA Filter Clean the dust cup, HEPA and filter screen with a brush or paper towel. If necessary, clean with water directly Remove the back cover by turning it counterclockwise...
- Page 11 Remove the outlet air filter cotton and clean it up outlet air filter cotton 9. After the parts are fully dried, they can be put back according to the disassembly procedure tips ：It is recommended to carry out the above cleaning work after the dust is dumped each time.
-
Page 12: Troubleshooting
Attention 1.Please pay attention to sharp objects such as glass to prevent injury. 2.The parts must be completely dry before installing. 3.Do not scrub the filter cotton or apply brute force to it 4.Please make sure that the filter cotton has been installed before assembly. 5.Do not continue to use when the filter cotton in the dust cup is damaged or if the cleaning and maintenance are not sufficient. -
Page 13: Safety Introduction
This product is functioning at temperature range within 5℃ to 40℃. ● Do not use this product in high-temperature environment. ● Please remove batteries from this product before disposal. ● Product Parameters Product Technical Parameters Model Rated Charging Voltage Rated voltage Rated Power CS-VC109 5VDC/2A 11.1V 100W...
Need help?
Do you have a question about the CS-VC109 and is the answer not in the manual?
Questions and answers