Table of Contents
Advertisement
Rear Panel
1 2
IN
OUT
ANTENNA
12 11
1. ANTENNA IN jack
Use to connect an antenna.
2. VIDEO IN jack (E1)
Use to connect external device with a RCA video
cable.
3. VIDEO OUT jack
Use to connect a TV monitor, AV receiver or other
device with a RCA video cable.
4. COMPONENT VIDEO OUTPUT jacks
Use to connect a TV monitor with component video
inputs with a component video cable.
5. HDMI OUT jack
Use an HDMI cable to connect to a display with an
HDMI compatible port.
6. AC Power Cord
Connect to a standard AC outlet to supply power to
this unit.
7. DIGITAL AUDIO OUTPUT (COAXIAL/OPTICAL) jacks
Use to connect an AV receiver, Dolby Digital decoder
or other device with a digital audio coaxial/optical
input jack with a digital audio coaxial/optical cable.
8. S-VIDEO OUT jack
Use to connect the S-video input of a TV monitor, AV
receiver or other device with an S-video cable.
E2H42UD_DVDR3576H-37_EN.indd 11
E2H42UD_DVDR3576H-37_EN.indd 11
FUNCTIONAL OVERVIEW
3
4
5
VIDEO
VIDEO
Y
IN
OUT
L
P
/C
B
B
HDMI OUT
L
R
IN
R
P
/C
OUT
R
R
COAXIAL OPTICAL
DIGITAL AUDIO OUTPUT
COMPONENT
AV IN
S-VIDEO
AV OUT
S-VIDEO
PCM / BITSTREAM
VIDEO OUTPUT
10
9
8
7
9. AV OUT jacks
Use to connect a TV monitor, AV receiver or other
device with a RCA audio cable.
10. S-VIDEO IN jack (E1)
Use to connect the S-video output of external device
with an S-video cable.
11. AV IN jacks (E1)
Use to connect external device with a RCA audio
cable.
12. ANTENNA OUT jack
Use to connect an RF coaxial cable to pass the signal
from the ANTENNA IN to your TV.
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have the RF modulator.
6
EN
EN
11
11
2007/12/28 11:14:43
2007/12/28 11:14:43
Advertisement
Table of Contents
