LAYOUT
TERMINAL WIRING
(P1)
Power/Motor
Function
Terminals
Supply power output for heater.
1
Heater L/+
Internally connected to Supply L/+ terminal.
2
Supply L/+ Supply Power Line or (+)
3
Supply N/-
Supply Power Neutral or (-)
Output for spring return electric actuator
brakes. Switches supply power when motor
External
4
outputs are energized.
Brake
AC version: Switch off when motor on.
DC version: Switch on when motor on.
AC version: Energize clockwise motor
Motor
winding.
5
CW
DC version: Switch (+) supply voltage for
clockwise operation.
AC version: Energize counterclockwise
Motor
motor winding.
6
CCW
DC version: Switch (+) supply voltage for
counterclockwise operation.
Internally connected to Supply N/- terminal.
Can be used for second heater connection.
7
Motor N
AC version: Motor neutral
DC version: No motor functionality
(P2)
Signal/Comm
Function
Terminals
1
+24V Out
Auxiliary 24VDC output.
I/O 1 (A1)
2
Command signal input.
Signal In
Signal
3
Command signal reference.
GND
I/O 2 (A2)
4
Feedback signal output.
Signal Out
Signal
5
Feedback signal reference.
GND
6
GND / 0V
0V reference for +24V output.
Connected to enclosure through TMC4
7
Earth
mounting bracket.
MODULE INSTALLATION
www.atcontrols.com
SIGNAL WIRING CONFIGURATIONS
Command Type = mA Sinking
Externally Powered Loop Control
Command Type = On-Off
Externally Powered Inputs
Feedback = mA or V
ACTUATOR WIRING
AC Proportional Control
DC Proportional Control
1
TMC-4 Control Card for Electric Actuators
Quick Setup Guide (V3.00)
1.
Power / Motor Terminals (P1)
2.
Signal Terminal (P2)
3.
Fuse
4.
Expansion Header (P4) (option)
5.
Position Switches Header (P5)
7.
Feedback Potentiometer Header (P7)
8.
Thermistor Header (P8) (option)
9.
Stop (Torque) Switches Header (P9)
10. Operation Module Slot
11. Joystick
12. Display
13. LEDs
14. Run/Program Switch
15. USB Connector
Command Type = mA Sinking
2-Wire Transmitter Control
Command Type = On-Off
Using TMC-4 +24V Output
AC Two Position Control
DC Two Position Control
Command Type = 5V and 10V
Command Type = Potentiometer
05/16/22
IOM08176 REVISION 00
Need help?
Do you have a question about the TMC-4 and is the answer not in the manual?
Questions and answers