Installation - CDA MC50 Manual For Installation, Use And Maintenance

MOUNTING THE APPLIANCE
PRIOR TO CONNECTING
plate corresponds to the voltage in your
home.
located on the side of
the oven cavity wall. They
prevent grease & food parti-
cles from entering the mi-
crowave inlet channels.
the oven cavity is
empty before mounting.
AFTER CONNECTING
fi rmly closed.

INSTALLATION

structions when installing the appliance.
on the rating
if the oven door is
separate mounting in-
that the oven door closes fi rmly against the
door support and that the internal door seal is
not damaged. Empty the oven and clean the
interior with a soft, damp cloth.
damaged mains cord or plug, if it is not
working properly, or if it has been dam-
aged or dropped. Do not immerse the
mains cord or plug in water. Keep the
cord away from hot surfaces. Electrical
shock, fi re or other hazards may result.
ry. The manufacturer will accept no re-
sponsibility for injury to persons, ani-
mals or damage to objects arising from
the non-observance of this requirement.
Check
if it has a
is compulso-