SereneLife SLCATL420 User Manual
SereneLife SLCATL420 User Manual

SereneLife SLCATL420 User Manual

Advertisement

Quick Links

MAIN FEATURES

Premium user comfort: Full size & soft-close seat
and lid, large toilet bowl and 478mm seat height
brings greater homelike performance.
Easy to flush: High gloss toilet bowl with original
T type 3 way flush flow creates high-speed, full bowl
flushing.
Ergonomically enhanced pedal operation:
Lower pedal height for easier use.
One-direction action to open drain valve and flush.
Easy installation: Two bolts design fits most existing
toilet floor flanges, great for new or replacement
Installation. Just place on floor flange, tighten bolts,
connect water, and it's ready.

COMPONENTS

www.SereneLifeHome.com
FLOOR MOUNTING KIT
Flange plate
Seal ring
T-bolt and
rubber case

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SLCATL420 and is the answer not in the manual?

Questions and answers

Summary of Contents for SereneLife SLCATL420

  • Page 1 MAIN FEATURES • Premium user comfort: Full size & soft-close seat and lid, large toilet bowl and 478mm seat height brings greater homelike performance. • Easy to flush: High gloss toilet bowl with original T type 3 way flush flow creates high-speed, full bowl flushing.
  • Page 2 PRODUCT AND MOUNTING DIMENSION The outside diameter of the toilet drain outlet: 95mm / 3.7”; The inner diameter of the toilet drain outlet: 87mm / 3.4” INSTALLATION Note: • Be sure foot pedal, when pressed, touches same flat surface on which toilet is installed. •...
  • Page 3 Back wall 200mm 200mm 200mm Fig.1 Fig.2 Before connecting your pipe connector Fig.3 (plastic one is recommended) to the ½ inch water inlet (1/4-20 British thread), make sure there is a sealing ring in the pipe connector. Pipe Connector If not, the attached sealing ring must be placed to Water Inlet ensure perfect sealing.
  • Page 4 FLUSH VALVE/SEAL CLEANING After a period of time, mineral deposits from hard water may build up on the flush ball or seal, resulting in a slow water leak. To prevent this, periodically clean the flush valve and seal. 1. Remove minor debris from the flush valve and seal by slowly pressing and releasing the flush pedal several times.

Table of Contents