Miles Valor L2 Series Installation Instructions Manual

WARNING
!
A barrier designed to reduce the risk of burns from the hot viewing
glass is provided with this appliance and shall be installed
for the protection of children and other at-risk individuals.
Trim size
The 1750 Linear 5-1/4" Surround Kit is designed to be
used on the Linear L2 1700 Valor heater.
The application of this kit does not affect the venting
capabilities or method of preparation of the 1700 heater
as described in the 1700 heater installation manual.
This trim fi ts fl at against the cement board with the ability
to tuck additional non-combustible materials up to 1/2
inch thickness behind the trim.
Replacing the side panels on the trim allow non-
combustible material thickness to be increased to 1 inch.
4003739-02
© Copyright Miles Industries Ltd., 2013.
L2 S
1750 Linear 5-1/4"
Surround Kit
Approved for use with Valor Models 1700 Heaters ONLY
Installation Instructions
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
59-1/2" (1511 mm)
1-3/8" (35 mm)
Thickness
ERIES
LH Trim panel
LH Side door
Barrier screen
Overview (Fireplace engines sold separately)
I NSTALLER
Leave this manual
with the appliance.
CO N SU MER
Retain this manual
for future reference.
Note: This kit must be installed
by a qualifi ed installer, service
agency or gas supplier. These
instructions are to be used in
conjunction with the fi replace
main installation instructions.
Non-combustible
cement board
Plinth
Trim
RH Trim panel
RH Side
door