Summary of Contents for Global Water WE900
- Page 1 Global Water 800-876-1172 • globalw.com Global Water Instrumentation, Inc. 11257 Coloma Road Gold River, CA 95670 T: 800-876-1172 Int’l: (916) 638-3429, F: (916) 638-3270 4-20mA Weather Station: WE900 5/28/02 - 1 -...
-
Page 2: Table Of Contents
4-20mA Weather Station. This instrument has been quality tested and approved for providing accurate and reliable measurements. We are confident that you will find the WE900 to be a valuable asset for your application. Should you require assistance, our technical staff will be happy to help. -
Page 3: Checklist
Inc. and file a claim with the carrier involved. Use the checklist to ensure that everything needed to operate the WE900 was shipped. III. Description a. The Global 4-20mA Weather Station, WE900, is a rugged and reliable system for monitoring weather related parameters. - 3 -... -
Page 4: Installing The 4-20Ma Weather Station
Global Water 800-876-1172 • globalw.com Installing the 4-20mA Weather Station a. Please refer to Appendix A prior to installing the 4-20mA Weather Station to review any optional sensor’s mounting instructions that may modify the standard setup. b. Each sensor comes equipped with mounting hardware for a 1”... -
Page 5: 4-20Ma Weather Station Calibration Information
Global Water 800-876-1172 • globalw.com 4-20mA Weather Station Calibration Information a. Each Weather Sensor will have to be calibrated to your PLC, RTU, or SCADA system. Calibration numbers have been attached to each sensor. Refer to the Weather Sensor manual to determine how often each sensor should have its calibration checked. -
Page 6: Troubleshooting
Authorization). DO NOT return items without a RMA # on the outside of the package. Include a written statement describing the problems. Send the package with shipping prepaid to Global Water’s factory address. Insure the shipment, as the warranty does not cover damage incurred during transit. -
Page 7: Warranty
Global Water’s obligations under this warranty are limited to, at Global Water’s option: (I) replacing or (II) repairing; any products determined to be defective. In no case shall Global Water’s liability exceed the products original purchase price. This warranty does not apply to any equipment that has been repaired or altered, except by Global Water Instrumentation, Inc., or which has been subject to misuse, negligence... -
Page 8: Appendix A: Optional Equipment Mounting Instructions
Barometric Pressure Sensor Mounting Instructions a. The barometric pressure sensor should be mounted in a manner that protects it from the elements, but exposes it to the air. Global Water recommends mounting it in some type of weather resistant enclosure that is vented.