Edbak TR18 Installation Manual

For flat displays

Advertisement

TR18
TR18
TR18
WARNING:
Please read this manual before the installation to ensure proper assembly.
cart for flat displays
The assembly should be carried out in accordance with this manual by at least
two persons with proper qualifications in assembly. EDBAK Company shall not be
liable for any material or property damage or bodily injury resulting from improper
Assembly. Therefore, you should always follow the instructions:
- during the assembly, please follow the instructions carefully. Otherwise, it may
result in product damage or even personal injury;
- before the assembly you must ensure that under the surface of the wall where
the mount is to be fixed there are no power cables, water or sewage pipes or gas
installations;
- while fixing the screen on the mount, please ensure that the screws are of proper
length and diameter. In order to ensure the right length and diameter, you may use
the accompanying plastic pads. Use of improper screws may result in permanent
product damage. Extra caution should be given with movable elements in order to
prevent crushing or pressing your hands or fingers. This manual indicates such
elements.
The terms of the product guarantee are set forth in the guarantee card
OSTRZEŻENIE:
Przed rozpoczęciem montażu należy uważnie zapoznać się z instrukcją uchwytu
oraz ekranu w celu zapewnienia prawidłowego montażu.
Prace montażowe powinny wykonywać co najmniej dwie osoby posiadające kwalifi-
kacje w zakresie montażu zgodnie z niniejszą instrukcją.
Firma EDBAK nie bierze odpowiedzialności za straty materialne oraz uszkodzenia
mienia lub ciała, wynikające z nieprawidłowego montażu. Dlatego należy zawsze
przestrzegać:
- w trakcie montażu dokładnie przestrzegać załączonej do produktu instrukcji mon-
tażowej, w przeciwnym razie może to prowadzić do zniszczenia sprzętu, a nawet
uszkodzeń ciała,
- koniecznie przed montażem upewnić się, że pod powierzchnią ściany, na której
będzie mocowany uchwyt nie ma kabli elektrycznych, rur wodnokanalizacyjnych lub
instalacji gazowych,
- w trakcie montażu ekranu do uchwytu upewnić się, że użyte śruby są dobrze do-
brane co do długości i średnicy. W celu idealnego dobrania długości śrub można
skorzystać z dołączonych podkładek plastikowych. Zastosowanie niewłaściwych
śrub grozi trwałym uszkodzeniem sprzętu,
- w miejscach wskazanych w instrukcji, w których są ruchome elementy uchwytu
zachować szczególną ostrożność w celu uniknięcia przyciśnięcia, dłoni i palców.
Warunki gwarancji wg załączonej do produktu karty gwarancyjnej.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TR18 and is the answer not in the manual?

Questions and answers

Summary of Contents for Edbak TR18

  • Page 1 The assembly should be carried out in accordance with this manual by at least two persons with proper qualifications in assembly. EDBAK Company shall not be liable for any material or property damage or bodily injury resulting from improper assembly.
  • Page 2 Checklist/Lista element w Checklist/Lista element Assembly/Montaż Assemble the base from the profiles and screw the wheels. TR18 Part list Podstawę z profili zmontować i przykręcić kółka jezdne. Elementy do montażu TR18 DIN 912 M10x30 DIN 125 M10,5 O (4x) DIN 128...
  • Page 3 TR18 TR18 Assembly/Montaż Assembly/Montaż Assemble the tube using the sleeves. Assemble the load-carrying beam consisting of the beam and plate using bolts and washers. Rurę zmontować przy użyciu łupków. Zmontować belkę nośną złożoną z belki i płyty z zastosowaniem śrub i podkładek.
  • Page 4 TR18 TR18 Assembly/Montaż Assembly/Montaż Screw the arms to the display. Match bolts to the display type M4, M6, M8. Install the tubes on the base and tighten the screws. Przykręcić ramiona do monitora. W zależności od rodzaju ekranu śrubą M4, M6, M8 Na podstawie zamontować...
  • Page 5 TR18 TR18 Assembly/Montaż Technical drawing/ Rysunek techniczny EDBAK Sp. z o.o. Piotrowice 186, 23-107 Strzyżewice Tel. +48 81 562 81 19...

Table of Contents