Test Your Tv Reception; Change The Order Of Stored Channels - Philips 52PFL8803D/93 User Manual

5�6

Test your TV reception

This option lets you check the strength of the
signal that is being transmitted via your antenna
connection.
If you are not in the digital mode, press
D
(DIGITAL/ ANALOGUE).
1. Press the numeric buttons
(CHANNEL) +/- buttons to switch
to the digital channel you wish to test the
signal.
2. Press (DIGITAL MENU) to
display the on-screen menu and select
Installation > Test Reception >
Frequency.
The frequency of the current channel is
displayed.
Setup | Setup | Installation Setu p | p | p | Inst Installa allation tion
Test reception
Frequency
Network name
Signal quality
Signal strength
Installation
3. Press ï to select Network name. The
name of the broadcast network is displayed.
Setu Setup | Installation Setup | p | p | p | Installa Inst allation tion
Test reception
Frequency
Network name
Signal quality
Signal strength
Installation
4. Press ï to select Signal quality�
An indicator bar displays the quality level of
the TV signal.
EN-18
(0-9) or the
Frequency
60500 KHz
Color Temp p p
Contrast +
NR
Close
Network name
BAND-HD
Color Temp p p
Contrast +
NR
Close
Setup | Installation Setup | Setu p | p | p | Inst Installa allation tion
Test reception
Frequency
Network name
Signal quality
Signal strength
Installation
5. Press ï to select Signal strength.
An indicator bar displays the strength level
of the TV signal.
Setup | Installation Setu Setup | p | p | p | Installa Inst allation tion
Test reception
Frequency
Network name
Signal quality
Signal strength
Installation
6. Press Í to return to the previous menu or
press (DIGITAL MENU) to exit.
Tip: If the signal strength is poor, consider
E
adjusting or checking the connection
of your antenna. Contact a professional
antenna installer for best results.
5�7 Change the order of stored
channels
You can change the order of the digital
channels and radio stations that you have
stored.
If you are not in the digital mode, press
D
(DIGITAL/ ANALOGUE).
1. Press (DIGITAL MENU) to
display the on-screen menu and select
Installation > Service List > Rearrange
Services and press Æ.
Signal quality Installation
Color Temp p p
Contrast +
NR
Close
Signal strength Installation
Color Temp p p
Contrast +
NR
Close