Wyrestorm HALO Series Quick Start Manual

HALO Series All In One Video Bar
HALO VX10

Setting up the Video Bar

FOR PLACEMENT ON A MONITOR

1. Angle the mount of the HALO VX10 to fit on a
TV, computer,or monitor at a position or angle
you desire.

FOR PLACEMENT ON A TRIPOD*

1. Locate the M12 tripod thread on the bottom of
the Halo VX10.
*Tripod not included

Wall Mounting Installation

1. Drill holes on the wall and insert the expansion
screws provided.

CONNECTING THE VIDEO BAR

Plug the HALO VX10 into an available USB port on your computer.
*For best performance, use a USB 3.0 port.
Copyright © 2022 WyreStorm Technologies |
HALO VX10 Quickstart Guide | 220113
2. Adjust the HALO VX10 to make sure the foot on
the mount is flush with the back of your device.
2. Secure the Halo VX10 on your tripod by twisting
it into the M12 thread.
2. Secure the wall-mounted bracket on the wall
using the screws provided.
USB-C to USB-A*
wyrestorm.com
Connect the DC power supply to a mains outlet.
INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973)
1 of 2
Quickstart Guide
3. Manually adjust the HALO VX10 up/down to the
best position to frame yourself.
3. Place your Halo VX10 with the tripod anywhere
you desire to the best position to frame
yourself.
3. Secure the HALO VX10 on the wall-mounted
bracket.
support@wyrestorm.com