Philips 37PFL9604H/12 User Manual page 46

2.1.2 Universal remote control
Manual setup
You can manually enter an RC code to set up a Universal
mode key. Look up the appropriate RC code in the
Universal RC code list in this user manual. In the list, look
for the type of device and brand you need. Some brands
have several RC codes available. When setup is performed
manually, try to operate the device with the relevant keys.
If the device does not respond or operates incorrectly and
there is more than 1 code available, you can restart the
manual setup using another RC code.
To enter an RC code manually
1 Press the Universal mode key you want to set up, DVD,
STB or HTS and press this key together with the OK key for
4 seconds simultaneously. All 4 keys light up for 1 second
and the key you are setting stays lit.
2 Enter the 4-number RC code you found in the list.
3 If the code is accepted, all 4 keys blink 3 times. If you
entered a code that does not exist, all keys blink for 2
seconds. You can re-enter a code.
4 If the code is accepted, the Universal mode key is set up.
...
3/4