Summary of Contents for Spartan Equipment SKID-PAC 1000
Page 1
TECHNICAL MANUAL SKID-PAC 1000 & 1000B Technical READ THIS MANUAL BEFORE OPERATING Manual Read, understand and follow carefully the operating and safety instructions in 573936 this manual to ensure safe and efficient operation of the Spartan Equipment. Rev 09nov...
Page 3
Spartan Equipment. Read DANGER - Indicates an imminent hazard, and follow the instructions of each safety which, if not avoided, will result in death or message and be aware the consequence if serious injury.
Page 4
Spartan Equipment for handling the Skid-Pac. any additional safety precautions. CAUTION CAUTION Fluid penetration hazard. Pressurized oil can Keep personnel away from penetrate skin.
Page 5
Spartan Equipment Technical Manual Skid-Pac 1000, 1000B CAUTION WARNING Crush hazard. Instruct machine operator to Crush hazard. Injury may move controls only when result if the Skid-Pac directed by the shifts or falls. Do not lift equipment installer. the Skid-Pac by the...
Page 6
Construction Guidelines and appropriate measures to safeguard Regulations against personal injury and property damage. Use the Spartan Equipment in accordance with all federal, state and local regulations Has received adequate training in safe regarding construction practices and public and proper installation, maintenance safety.
Page 7
Spartan Equipment Technical Manual Skid-Pac 1000, 1000B Ask for Construction Industry OSHA Accident prevention through operational Standards Stock #869-034-00107-6. safety programs must be further developed by the equipment owner and tailored to meet specific site conditions and Operational Safety Program applications.
Page 10
Spartan Equipment Technical Manual Skid-Pac 1000, 1000B Document Change Notice for Spartan Equipment Skid- Model 1000 Date Page Change Nov. 30, 2005 Original Issue of Technical Manual 571834 Jan. 4, 2006 Revise text May 1, 2006 Throughout Revise parts list & figures May 10, 2006 27 &...
Table 1.2 Table 1.1 Related Publications Technical Manual No. 573936 Manual Model Part No. This Technical Manual is applicable to the following Spartan Equipment Skid-Pac Technical product(s): 573936 1000 & Manual 1000B Product The Technical Manual provides safety...
Manufacturer’s name the equipment identification plate to the space provided below. Address Indicate the date in which the Product name Spartan Equipment was placed into Model number service. Serial number Return the completed warranty registration form to Spartan Year of manufacture Equipment.
Equipment attachment, including machine which it is intended. set-up, operation, service or use of non- Spartan Equipment parts may result in loss Adhere to the specifications listed in of performance or subject the equipment to this manual and operate the Spartan conditions beyond their design.
Non-approved modifications 3.3 Spartan Equipment Product These exclusions apply to damage to the Policies Spartan Equipment, associated equipment and injury to personnel. In this manual, Spartan Equipment recommends Skid-Pac applications, maintenance and service consistent with industry practices.
NOTE: The valve is Contact your dealer or Spartan Equipment if factory pre-set and requires no further you have any questions regarding the adjustments. installation of this equipment.
5.1 Skid-Pac the dynamic assembly are developed by the speed of the hydraulic motor. The Spartan Equipment Skid-Pac is a Therefore, reduced compaction high-energy compaction tool utilizing three performance can be expected due to a compaction techniques: drop in motor speed.
The cracking pressure (dynamic) is the valve. At no time is it permissible to always less than the static pressure. A subject the Spartan Equipment relief valve set to a dynamic pressure of attachment to Static Pressures that 3000 psi (200 Bar) will crack open when exceed the values listed in Section 6.
These include the quick disconnect couplings, hoses, hose fittings, valve and motor. Avoid contact with hot parts. The SPARTAN EQUIPMENT LOGO decal is the Spartan Equipment brand identifier and is a registered trademark of Spartan Equipment. The OIL FILL decal identifies the location to add oil to fill the oil reservoir.
1000, 1000B 6.3 IDENTIFICATION and SAFETY LABELS (cont’d) IMPORTANT Safety messages appear on labels affixed to the Spartan Equipment. Keep all safety decals clean. Immediately replace any label if words or illustrations are unreadable or if label is damaged or missing.
MOUNTING INFORMATION 7.1 Skid-Pac Mounting Spartan Equipment’s Skid-Pac is designed to easily mount to most skid-steers without additional mounting hardware. The Skid-Pac is furnished with hoses equipped with hydraulic quick disconnects to make the hydraulic connection quick and easy. Follow carefully the...
INSTALLATION & REMOVAL 8.1 Carrier Compatibility IMPORTANT Do not operate the Skid-Pac beyond its Spartan Equipment’s Skid-Pac is designed performance limits. Exceeding the for use and installation on most skid steers specifications listed in Section 6.1 can be and is attached in the same manner as dangerous to the operator and result in mounting a bucket.
Spartan Equipment Technical Manual Skid-Pac 1000, 1000B 8.3 Installation on to Carrier CAUTION Repair or replace any damaged CAUTION components prior to operation. Do not operate Skid-Pac until all faults are The weight of the Skid-Pac cannot exceed corrected. the maximum lifting capacity of the carrier in any position.
Spartan Equipment Technical Manual Skid-Pac 1000, 1000B 8.4 Removal from the Carrier 1. Position Skid-Pac on flat stable ground. Shut down engine and secure the CAUTION parking brake. Burn hazard. Hydraulic 2. Relieve residual hydraulic pressure in components, including the auxiliary circuit.
Spartan Equipment Technical Manual Skid-Pac 1000, 1000B SECTION 9.0 OPERATION 9.1 Pre-operation Checks CAUTION Daily, before operating: Keep personnel away 1. Ensure Skid-Pac is securely attached to from Skid-Pac while in the carrier. Check for wear or damage. operation. Never operate Skid-Pac with workers in 2.
Page 27
Spartan Equipment Technical Manual Skid-Pac 1000, 1000B 6. As the material compacts, maintain a IMPORTANT constant down force with the carrier. For Do not operate Skid-Pac with larger areas, decrease down-force and hydraulic oil temperature above 180 slide the compactor over the material with a repetitive, back and forth motion.
Do not attempt any repairs unless you have proper knowledge, equipment and tools. The Troubleshooting guide is designed to help diagnose possible causes of several commonly encountered conditions. For conditions other than these, contact Spartan Equipment’s Technical Service for further assistance. Fault...
Pac. Excessive dirt on the Skid-Pac can When properly installed, operated and decrease performance. maintained by qualified personnel, the Spartan Equipment Skid-Pac requires a Check for loose or missing fasteners. minimum of service. Maintain clean oil in the carrier. Follow the Visually check for oil leaks.
Spartan Equipment Technical Manual Skid-Pac 1000, 1000B 11.3 Preventative Maintenance If reduced performance is observed. After every 100* hours of Skid-Pac operation, 11.6 Pressure Relief Plug (Model 1000) inspect the following: The eccentric housing is equipped with a pressure relief check valve. This check valve...
Spartan Equipment Technical Manual Skid-Pac 1000, 1000B 11.7.2 How To Check and Add Oil 4. If oil is required: Remove the oil fill plug. Add oil until the level reaches the bottom of the oil level opening. Do not overfill! 5.
Interference press fit. Press only against Non-approved parts may cause loss of the outer race. performance or damage. Use only genuine Spartan Equipment 4. Clean the eccentric shaft and apply a light replacement parts to protect total coating of oil. Slip bearing/housing onto warranty coverage.
The hydraulic motor has no user-serviceable service work. parts. Contact Spartan Equipment’s Technical Service for further information. 1. Position Skid-Pac on flat, stable surface. 11.10.2 Motor Rotation 2. Support top mounting frame to remove load off mounts.
Spartan Equipment Technical Manual Skid-Pac 1000, 1000B 11.11.1 Flow Regulator Valve Service 11.12 Tightening Torque The flow regulator valve has no user IMPORTANT serviceable parts. Contact Spartan Replacement fasteners must be the same Equipment’s Technical Service for further type and grade. Adhere to proper torque.
Spartan Equipment Technical Manual Skid-Pac 1000, 1000B SECTION 12.0 LIFTING, TRANSPORT & STORAGE 5. Lift attachment only at approved lift WARNING points. See diagram in Section 6.3. Crush hazard. Injury may 6. Adequately stabilize and secure result if the Skid-Pac attachment for transport.
Product name - Ho-Pac the Skid-Pac, such as the top mounting frame, dynamic assembly, compaction Model number – Skid-Pac 1000, plate, motor and flow regulator valve, can 1000B vary. Serial number – See Section 2...
There are no user-serviceable parts in the hydraulic motor or the flow regulator valve. Refer to Figure 13-1. Measure the distance Contact Spartan Equipment’s Technical (“L”) from the back surface of the mounting Service for further information. flange to the rear of the motor body (not including bolts).
Need help?
Do you have a question about the SKID-PAC 1000 and is the answer not in the manual?
Questions and answers