Summary of Contents for Regency 600PHSPUMP
- Page 1 TRANSFER PUMP USER MANUAL WATER PUMP FOR PORTABLE SINKS #600PHSPUMP 07/2021 REGENCYTABLESANDSINKS.COM...
-
Page 2: Safety Instructions
Max. Item # Lift 0 ft. 10 ft. 20 ft. 30 ft. 42 ft. 600PHSPUMP 1/10 320 GPH 280 GPH 190 GPH 90 GPH 0 GPH 42 ft. SAFETY INSTRUCTIONS 1. Do not pump flammable or explosive liquids such as oil, gasoline, kerosene, ethanol, etc. Do not use in the presence of flammable or explosive vapors. -
Page 3: Pre-Installation
PRE-INSTALLATION APPLICATION • This pump is designed for operating portable hand washing stations by transferring clean water from storage tanks to the sink faucet. SPECIFICATIONS 115V • 60 Hz POWER SUPPLY 32-95°F LIQUID TEMP. RANGE 3/4" Garden Hose Thread Connection DISCHARGE ½"... -
Page 4: Operation
OPERATION After reading these instructions, consider the following points GFCI-Protected before starting the pump: 120V Socket 1. Verify that the discharge pipe is properly connected. 2. Verify that the electrical connection is 120 VAC, 60 Hz. 3. Verify that the electrical socket is GFCI protected and in good condition. -
Page 5: Troubleshooting
TROUBLESHOOTING Problem Possible Cause Corrective Action The fuse is blown Replace the fuse The breaker is tripped Reset the breaker The plug is disconnected Secure the plug The pump does The plug is corroded Clean the plug prongs not start or run. The brushes are worn Replace the brushes Unplug from power and wait for 30 minutes,...
Need help?
Do you have a question about the 600PHSPUMP and is the answer not in the manual?
Questions and answers