Table of Contents
Advertisement
3.2 Assembly/Panel Removal
3.2.1 Stand removal
1. Remove the fixation screws [1] that secure the stand.
2. Take the stand bracket out from the set.
3.2.2 Rear Cover
Warning: Disconnect the mains power cord before removing the rear cover.
1. Remove all fixation screws [2] ，[3]and [4] that secure the Back cover assy.
2. Unplug the connector that marked by red box below from SSB. (For 73x4/7504 series)
3. Gently lift the rear cover from the TV. Make sure that wires and cables are not damaged while lifting the rear cover from the set.
2
2
2
1
1
4
4
2
2
(OLED804 series)
(OLED804 Series)
4
4
1
1
2
2
2
3
2
2
2
Advertisement
Table of Contents
