Advertisement
Quick Links
How to change service mode from UFB to DSL
1
Open your web browser and type the default IP Address 192.168.1.1 in
the address bar. The default password is 'admin' . Type in 'admin' for new
password and con rm password, and click 'Let's Get Started'
2
Please go to 'Advanced' -> 'Operation Mode' and select 'DSL Modem
Router Mode' then Save. The modem is automatically retarted and it takes
2-3 mins.
3
You will nd a solid light on DSL
Internet
This means that your modem is connected to our network.
If your Broadband is still not working ...
Megatel Call Centre
Mon - Fri 9am to 6pm Phone 0800 634 283 Email faults@megatel.co.nz
and blinking / solid light on the
Router Set-up Guide
TPLINK Archer VR2100v
Your new router is already programmed, so all you have to do is simply
connect the device to use your internet service.
This guide shows how to set up your router and the WiFi details.
Advertisement
Summary of Contents for Megatel TPLINK Archer VR2100v
- Page 1 / solid light on the Internet This means that your modem is connected to our network. If your Broadband is still not working ... Megatel Call Centre Mon - Fri 9am to 6pm Phone 0800 634 283 Email faults@megatel.co.nz...
- Page 2 How To Set Up Your Router If your broadband is connected correctly, you will nd a light on and blinking / solid on the Internet For UFB (Ultra Fast Broadband) Locate the ONT box on the wall. For ADSL & VDSL A Connect one end of RJ11 cable into the DSL port on your router.
Need help?
Do you have a question about the TPLINK Archer VR2100v and is the answer not in the manual?
Questions and answers