Novanta Lightning II XY2-100 Important Instructions

If you have any issues or questions

while completing these steps, please

contact your regional team at:

www.novantaphotonics.com/support

About Novanta

Novanta is a trusted technology partner to original

equipment manufacturers in the medical and

advanced industrial technology markets, with deep

proprietary expertise in photonics, vision and

precision motion technologies. Through our globally

recognized Novanta brands in advanced photonics,

ARGES, Cambridge Technology, Laser Quantum and

Synrad, we deliver tailored laser and beam delivery

solutions to OEMs in a broad range of industrial and

medical markets.

Americas, Asia Pacific

+1 (781) 266 5700 | photonics@novanta.com

Europe, Middle East, Africa

+49 9431 7984-0

| photonics@novanta.com

China

+86-755-8280-5395 | photonics.china@novanta.com

Japan

+81-3-5753-2460 | photonics.japan@novanta.com

Models

2-Axis Scan Head*

3-Axis Scan Head*

*with XY2-100 Interface Board

Lightning™ II

Important Connection

Instructions for XY2-100

Interface

Table of Contents

Do you have a question about the Lightning II XY2-100 and is the answer not in the manual?

Page 1 +49 9431 7984-0 | photonics@novanta.com Lightning™ II China +86-755-8280-5395 | photonics.china@novanta.com Important Connection Japan Instructions for XY2-100 +81-3-5753-2460 | photonics.japan@novanta.com Interface © 2021, Novanta Corporation. All rights reserved. D20187, Rev. A Models 2-Axis Scan Head* 3-Axis Scan Head* *with XY2-100 Interface Board...
Page 2 Lightning ™ STEP 2: Connect Galvos Carefully connect the Lightning II galvos to 2-Axis Scan Head & 3-Axis Scan Head their corresponding servo boards using the provided galvo cables as shown in Figure 4. Important Connection Instructions (XY2-100 Interface Make sure that the X-axis galvo connects to X-axis servo, Y-axis galvo connects to Y-axis and for 3-Axis Scan Head that the Z-axis galvo Please wear an ESD strap when performing these steps.