Page 1
Introduction MODEL 2122 / 2122i The Model 2122 is a differential amplifier for use with low- BIOAMPLIFIER level signals -- 2 microvolts and above -- ranging from DC to 10 KHz. Primarily designed as biological instrumentation, the Model 2122 is well suited to many other demanding applications.
Page 2
Use these controls to filter out undesirable or • interfering signals. Here are recommended Since the Model 2122 responds to frequencies as settings for various bioelectric signals: low as DC (0 Hz), you’ll need to adjust this control when a signal has a DC (offset) component.
Page 3
• BioAmplifier Input Box To input a single-ended signal into Model 2122, • ground unused differential Model 2122 input, then Plugs into Model 2122 input connector adjust balance control. • Connects wire-terminated transducers. • AC switch position blocks DC component.
Page 4
COVERED BY OUR EXCLUSIVE "LIFELINE® WARRANTY" AS OUTLINED BELOW Warranty and repair If your UFI transducer, electrode, or electrode tester ceases to operate--regardless whether the cause is accidental, intentional, or All UFI instruments are warranted against defects in materials and whatever---return it to us.
Need help?
Do you have a question about the 2122 and is the answer not in the manual?
Questions and answers